Table of Contents
Advertisement
Reversing the door
NOTE
Door reversibility is available on all dryer models.
IMPORTANT
BEFORE YOU REVERSE YOUR DRYER DOOR:
1. Be sure you have adequate swing area
before reversing door.
2. Gather your tools - including a screw driver
with a #2 square bit and plastic knife (or
small, flat prying tool that won't damage
paint).
3. Be sure dryer is unplugged from power
source!
WARNING
Failure to disconnect power source before servicing could result in personal injury or
even death.
Removing latch and hole plugs
1.
Open the door.
2.
Remove plastic hole plugs and save to
reinstall later. You may have to use a
non-scratching plastic knife if you are
unable to dislodge the plugs manually.
ELECTRICAL SHOCK HAZARD
3.
INSTALLATION
Tools needed for reversal:
Remove both screws from door latch.
Save latch and screws for reinstallation
later.
25
Screwdriver
with #2
square bit
Plastic knife
Advertisement
Table of Contents
