Electrical Connections; Power Supply - CAME BXV06AGL Installation Manual

ELECTRICAL CONNECTIONS

Passing the electrical cables
Connect all wires and cables in compliance with the law.
The electrical cables must not touch any parts that may overheat during use (such as the motor and transformer).
Use cable glands to connect the devices to the control panel. One of these must be used exclusively for the power supply cable.

Power supply

Make sure the mains power supply is disconnected during all installation procedures.
Before working on the control panel, disconnect the mains power supply and remove the batteries, if any.
Connecting to the mains (230/120 V AC - 50/60 Hz)
F
Line fuse
L
Phase
N
Neutral
E
Ferrite
Earth
Power supply output for accessories
The output normally delivers 24 V AC.
F
L
N
24 0 24 0 10 11 E E 5 5