Table of Contents
Advertisement
INSTALL DUCTING
SEMI-RIGID DUCTING
1
2
3
Seal ducting to external outlet.
If required, secure ducting within ceiling.
Fit ducting to the external vent and
secure.
PREPARE HOOD
1
2
3
Slot non-return valves into the adapter
and ensure they fold upwards and move
freely when installed.
Fit the duct adapter to the rangehood
using two supplied Phillips screws.
Ensure that there is an air gap between
the mounting brackets and the hood
chassis. The mounting brackets can be
adjusted to achieve this if needed.
*Number of brackets will differ between models.
13
Advertisement
Table of Contents
