LG WT8600C Series Owner's Manual page 42

42 MAINTENANCE
4
Clean the outsides of the ezDispense
reservoirs and inserts with warm water.
• Use a soft cloth or brush to remove any
residue.
• Do not use soap when cleaning the drawer
and inserts.
5
If the detergent or softener is hardened inside
the ezDispense reservoirs, remove the covers
on the reservoirs, and clean the insides of the
reservoirs with warm water.
• Use a soft cloth or brush to clean and to
remove any residue.
• Do not use soap when cleaning the
reservoirs.
6
Securely close the covers on the ezDispense
reservoirs.
CAUTION
• Close the covers properly.
- If the reservoir covers are not closed properly,
the dispenser drawer may not be reinstalled.
- If there is a gap between the covers and the
reservoir, detergent and softener may harden
or water may enter the reservoir.
7
Wipe off any moisture with a dry towel or
cloth after cleaning.
8
Reassemble the reservoirs and reinstall the
dispenser drawer.
Cleaning the Bleach Dispenser
Bleach may build up on the bleach dispenser.
Check for buildup and clean the dispenser with
warm water once or twice a month.
Cleaning the Water Inlet Filters
If the washer does not fill properly, an error
message will appear on the display. The inlet valve
filter screens could be clogged by hard water scale,
sediment in the water supply, or other debris.
WARNING
• The inlet screens protect the delicate parts of the
inlet valve from being damaged by particles that
could enter the valves with the water supply.
Operating the washer with these filters removed
could cause a valve to open continuously,
resulting in flooding and/or property damage.
CAUTION
• Do not use the washer without the inlet filters.
Doing so will cause leaks and malfunction.
• If you use the washer in an area with hard water,
the inlet filter may clog due to lime buildup and
require more frequent cleaning.
1
Turn off the washer, and unplug the power
cord.