Glass Maintenance - Harman P61-C Owner's Manual

D. Glass Maintenance
The glass used in your stove is manufactured to exact standards to withstand the high heat of the fire, but like all glass, it
must be treated with common sense and care. Never slam the door shut or strike the glass with a heavy object. If the glass
is broken or damaged, do not operate the stove until it has been replaced.
Glass - Replacement
If the stove's glass is cracked or broken, you must replace it before operating your stove. Remove pieces carefully. Replace
glass only with Harman
®
Carefully remove damaged glass, gasket material, and hold down clips (set aside).
Install the self adhesive 1/4"" gasket material around the front face of the glass. Set the glass panel and gasket gently onto
the door. Install the hold down clips and tighten with bolts.
Glass - Cleaning
Sometimes it will be necessary to clean accumulated ash from the glass surface; allowing this ash to remain on the glass
for long periods can result in "etching" due to the acidity of the ash. Never clean the glass while it is hot, and do not use
abrasive substances. Wash the surface with cool water, and rinse thoroughly. You may wish to use a non-abrasive cleaner
specifically designed for use on stove glass. In any case, dry thoroughly before relighting your stove.
P43-C & P61-C Freestanding Pellet Stove
P68-C Freestanding Pellet Stove
15
replacement glass; do not use substitutes.
Glass Gasket
Retainers and screws
Adhesive gasket
Harman® • P-Series Owner's Manual_R15 • 2018 - ___ • 01/22
Replace glass only with
high temperature mirrored
ceramic glass.
Inspect door gasket
during cleaning and
inspection
Glass
Door Frame
8390-044C