Table of Contents
Advertisement
1. Important
This electronic user's guide is intended
for anyone who uses the Philips display.
Take time to read this user manual
before you use your display. It contains
important information and notes
regarding operating your display.
The Philips guarantee applies provided
the product is handled properly for
its intended use, in accordance with
its operating instructions and upon
presentation of the original invoice
or cash receipt, indicating the date of
purchase, dealer's name and model and
production number of the product.
1.1 Safety precautions and
maintenance
Warnings
Use of controls, adjustments or
procedures other than those specified
in this documentation may result in
exposure to shock, electrical hazards
and/or mechanical hazards.
Read and follow these instructions when
connecting and using your computer
monitor.
Excessive sound pressure from earphones
and headphones can cause hearing
loss. Adjustment of the equalizer to
maximum increases the earphones
and headphones output voltage and
therefore the sound pressure level.
Operation
•
Please Keep the monitor out of
direct sunlight, very strong bright
lights and away from any other heat
source. Lengthy exposure to this
type of environment may result in
discoloration and damage to the
monitor.
•
Keep the display away from oil. Oil
may damage the plastic cover of the
display and void the warranty.
•
Remove any object that could fall
into ventilation holes or prevent
proper cooling of the monitor's
electronics.
•
Do not block the ventilation holes
on the cabinet.
•
When positioning the monitor, make
sure the power plug and outlet are
easily accessible.
•
If turning off the monitor by
detaching the power cable or DC
power cord, wait for 6 seconds
before attaching the power cable or
DC power cord for normal operation.
•
Please use approved power cord
provided by Philips all the time. If
your power cord is missing, please
contact with your local service
center. (Please refer to Service
contact information listed in
Regulation & Service Information
Manual.)
•
Operate under the specified power
supply. Be sure to operate the
monitor only with the specified
power supply. Use of an incorrect
voltage will cause malfunction and
may cause fire or electric shock.
•
Protect the cable. Do not pull or
bend the power cable and signal
cable. Do not place the monitor
or any other heavy objects on the
cables, if damaged, the cables may
cause fire or electric shock.
•
Do not subject the monitor to severe
vibration or high impact conditions
during operation.
•
To avoid potential damage, for
example the panel peeling from the
bezel, ensure that the monitor does
not tilt downward by more than -5
degrees. If the -5 degree downward
1
Advertisement
Table of Contents
