Table of Contents
Advertisement
Contents
Trademarks
4 (E)
This manual is organized by following sections.
Section 1
Service Overview
This section explains the information and procedure required for service such as lists
of error code and remedy, procedure for writing of board information after
replacement of IC, and procedure for upgrading software version.
Section 2
Spare Parts
This section describes the spare parts.
Section 3
Semiconductor Pin Assignments
This section contains information on semiconductors used for unit.
It includes a complete list of the semiconductors and their ID Nos. for retrieving
information on "Semiconductor Pin Assignments" CD-ROM, which is available
separately.
Please refer to this section together with the "Semiconductor Pin Assignments" CD-
ROM.
Information on the semiconductors not contained in the CD-ROM at the time of
issue of this manual, if any, is given in this section as well.
Section 4
Overall Block Diagram
This section describes the overall block diagram.
Section 5
Schematic Diagrams
This section describes the schematic diagrams of each board.
Section 6
Board Layouts
This section describes the board layouts of each board.
Trademarks and registered trademarks used in this manual are follows.
. Windows 98, Windows 2000, Windows XP, and MS-DOS are registered
trademarks of Microsoft Corporation.
. IBM and AT are registered trademarks of International Business Corporation.
. Ethernet is a registered trademark of Xerox Corporation.
Other system names, product names, and company names appearing in this manual
are trademarks or registered trademarks of their respective holders.
HKSP-R80
Advertisement
Table of Contents
