Technical Information - Smeg STL262D User Manual

Problem
Odours inside the appliance.
Limescale deposits on the table‐
ware, on the tub and on the inside
of the door.
Dull, discoloured or chipped table‐
ware.
Refer to "Before first use", "Daily
use", or "Hints and tips" for other
possible causes.

14. TECHNICAL INFORMATION

Dimensions
Electrical connection
Water supply pressure
Water supply
Capacity
Possible cause and solution
• Refer to
• Start the Self Clean programme with a descaler or a cleaning
product designed for dishwashers.
• The level of salt is low, check the refill indicator.
• The cap of the salt container is loose.
• Your tap water is hard. Refer to
• Use salt and set regeneration of the water softener even when
multi-functional tablets are used. Refer to
er"
• Start the Self Clean programme with a descaler designed for dish‐
washers.
• If limescale deposits persist, clean the appliance with the suitable
detergents.
• Try a different detergent.
• Contact the detergent manufacturer.
• Make sure that only dishwasher-safe items are washed in the ap‐
pliance.
• Load and unload the basket carefully. Refer to the basket loading
leaflet.
• Place delicate items in the upper basket.
• Activate the
delicate items.
Width / height / depth (mm)
Voltage (V)
1)
Frequency (Hz)
Min. / max. MPa (bar)
Cold water or hot water
Place settings
"Internal cleaning"
.
option to ensure special care for glassware and
2)
.
"The water softener"
"The water soften‐
596 / 818 - 898 / 550
220 - 240
50
0.05 (0.5) / 1 (10)
min. 5 - max. 60 °C
13
ENGLISH
.
25