Table of Contents
Advertisement
Problem
Traces of rust on cutlery.
There are residues of detergent in
the dispenser at the end of the pro‐
gramme.
Odours inside the appliance.
Limescale deposits on the table‐
ware, on the tub and on the inside
of the door.
Dull, discoloured or chipped table‐
ware.
Refer to "Before first use", "Daily
use", or "Hints and tips" for other
possible causes.
14. TECHNICAL INFORMATION
Dimensions
Possible cause and solution
•
There is too much salt in the water used for washing. Refer to
"The water softener"
•
Silver and stainless steel cutlery were placed together. Do not
place silver and stainless steel items close together.
•
The detergent tablet was stuck in the dispenser and was not
washed away by water.
•
Water cannot wash away the detergent from the dispenser. Make
sure that the spray arms are not blocked or clogged.
•
Make sure that items in the baskets do not impede the lid of the
detergent dispenser from opening.
"Internal cleaning"
•
Refer to
•
Start the
programme with a descaler or a cleaning product de‐
signed for dishwashers.
•
The level of salt is low, check the refill indicator.
•
The cap of the salt container is loose.
•
Your tap water is hard. Refer to
•
Use salt and set regeneration of the water softener even when
multi-functional tablets are used. Refer to
er"
.
•
Start the
programme with a descaler designed for dishwash‐
ers.
•
If limescale deposits persist, clean the appliance with the suitable
detergents.
•
Try a different detergent.
•
Contact the detergent manufacturer.
•
Make sure that only dishwasher-safe items are washed in the ap‐
pliance.
•
Load and unload the basket carefully. Refer to the basket loading
leaflet.
•
Place delicate items in the upper basket.
•
Activate the
delicate items.
Width / height / depth (mm)
.
.
"The water softener"
option to ensure special care for glassware and
598 / 850 / 603
.
"The water soften‐
ENGLISH
25
Advertisement
Table of Contents
