4.2.9.7 SNMPv1, 2 Notification Recipients
Configure SNMPv1 and 2 notification recipients on this page. The SNMPv1, 2 Notification Recipients screens in
and
Figure 4-2-9-12
appear.
The page includes the following fields:
Object
Server Address
SNMP Version
Notify Type
Community Name
UDP Port
Time Out
Retries
Buttons
: Click to add a new SNMPv1, 2 host entry.
The page includes the following fields:
Object
Server Address
SNMP Version
Notify Type
Community Name
UDP Port
Time Out
Retries
Action
Figure 4-2-9-11: SNMPv1, 2 Notification Recipients Page Screenshot
Description
Indicates the SNMP trap destination address. It allows a valid IP address in
dotted decimal notation ('x.y.z.w'). It can also represent a legally valid IPv4
address. For example, '::192.1.2.34'.
Indicates the SNMP trap supported version. Possible versions are:
SNMP v1: Set SNMP trap supported version 1.
SNMP v2c: Set SNMP trap supported version 2c.
Set the notify type in traps or informs.
Indicates the community access string when send SNMP trap packet.
Indicates the SNMP trap destination port. SNMP Agent will send SNMP message
via this port, the port range is 1~65535.
Indicates the SNMP trap inform timeout. The allowed range is 1 to 300.
Indicates the SNMP trap inform retry times. The allowed range is 1 to 255.
Figure 4-2-9-12: SNMPv1, 2 Host Status Page Screenshot
Description
Displays the current server address
Displays the current SNMP version
Displays the current notify type
Displays the current community name
Displays the current UDP port
Displays the current time out
Displays the current retry times
: Delete the SNMPv1, 2 host entry.
User's Manual of IGS-4215-8T4X_IGS-4215-8UP4X
88
Figure 4-2-9-11