Advertisement
Installation
1. Shutdown system. See Reactor manual for instruc-
tions.
2. Use wrench to remove nipple between swivel fit-
tings.
F
. 1
IG
3. Install sensor fitting (1) as shown.
4. Route sensor cable (2) to the electrical enclosure.
a. For the A Side: Secure the cable to the frame
with three tie wraps and follow the wiring path
behind the proportioner pumpline in to the elec-
trical enclosure.
F
. 2: A Side
IG
3A3009A
b. For the B side: Route the sensor cable (2) back-
wards and route the cable up the frame into the
electrical enclosure.
F
. 3: B Side
IG
Installation
3
Advertisement
