Mechanical Reassembly Procedure
1. Assemble Bottom Cover
No
Procedure
1
(1) Screw 3 screws to
assemble the Elevator
Module.
(2) Screw 9 hex spacers and
assemble them to the Bottom
Cover.
2
(1) Screw 3 screws to
assemble the Fan.
(2) Screw 1 screw to
assemble the Lens Support.
(3) Assemble the Speaker
directly.
(4) Screw 2 screws to
assemble the Lamp Wire.
(5) Screw 2 screws to
assemble the Interlock Switch.
(6) Screw 1 screw to
assemble the Thermal Sensor
Board.
Chapter 3
Fan
Lens Support
Lamp Wire
Interlock Switch
Photo
Elevator Module
Speaker
Thermal Sensor Board
32