10. Remove Bottom Cover
No
Procedure
1
(1) Unscrew 3 screws to
remove the Fan.
(2) Unscrew 1 screw to
remove the Lens Support.
(3) Remove the Speaker
directly.
(4) Unscrew 2 screws to
remove the Lamp Wire.
(5) Unscrew 2 screws to
remove the Interlock Switch.
(6) Unscrew 1 screw to
remove the Thermal Sensor
Board.
2
(1) Unscrew 3 screws to
remove the Elevator Module.
(2) Unscrew 9 hex spacers
and separate them from the
Bottom Cover.
31
Fan
Lens Support
Lamp Wire
Interlock Switch
Photo
Speaker
Thermal Sensor Board
Elevator Module
Chapter 3