7. Remove Lamp Driver and LVPS
No
Procedure
1
(1) Unscrew 2 hex screws
& 4 screws and unplug 2
connectors to remove the
Lamp Driver.
(2) Loosen 4 tenons to
separate the Lamp Driver.
2
(1) Unscrew 2 hex screws & 4
screws and unplug 1 grouding
wire (with 1 screw) to remove
the LVPS.
(2) Unplug 3 connectors to
separate the LVPS.
27
Photo
Chapter 3