Ink Does Not Come Out/Blurry Or Fuzzy/Inaccurate Or Bleeding Colors/Streaks - Canon PIXMA TS7700i Series Manual

Ink Does Not Come Out/Blurry or Fuzzy/Inaccurate or Bleeding
Colors/Streaks
Ink Does Not Come Out
Note
• • If printouts are blank, black does not print, is faint, or has a blue or red tint, refer to this web page.
Check paper and print quality settings.
Check 1
Resolving Print Quality Problems
Check the estimated ink levels in the FINE cartridges.
Check 2
When a FINE cartridge runs out of ink, replace it with new ones.
Replacing a FINE Cartridge
Is the FINE cartridge attached properly?
Check 3
• Check that there is no orange tape left on the FINE cartridge. •
If the orange tape remains on the FINE cartridge, peel it off.
• If you do not close the ink cartridge locking cover correctly, ink may not be ejected correctly. •
Open the scanning unit / cover to open the ink cartridge locking cover, and then close it.
Press down the ink cartridge locking cover until it clicks into place.
Are the print head nozzles clogged?
Check 4
Follow the steps below to determine whether the ink ejects properly from the print head nozzles.
Printing a Nozzle Check Pattern.
Step 1
Blurry or Fuzzy Inaccurate or Bleeding
Colors
449
Streaks