Page 1 TS700 series Online Manual English...
Page 2: Table Of Contents
Contents Using Online Manual..........9 Symbols Used in This Document.
Page 3 Before Placing a Printable Disc........... . 89 Placing a Printable Disc.
Page 4 Legal Restrictions on Printing............153 Printer Handling Precautions.
Page 5 Printing Using Canon Application Software........
Page 6 Cannot Find Printer on Check Printer Settings Screen During Wi-Fi Setup (Windows)-Checking Printer's Wi-Fi Settings........... . . 244 Cannot Find Printer on Check Printer Settings Screen During Wi-Fi Setup (Windows)-Checking Wi-Fi Environment.
Page 7 Printout Results Are Unsatisfactory........... . 291 Printouts Are Blank/Blurry or Fuzzy/Inaccurate or Bleeding Colors/Streaks or Lines.
Page 8 1688..............339 1689.
Page 9: Using Online Manual
Using Online Manual Operating Environment Symbols Used in This Document Touch-enabled Device Users (Windows) Printing Online Manual Trademarks and Licenses Screenshots in This Manual...
Page 10: Symbols Used In This Document
Symbols Used in This Document Warning Instructions that, if ignored, could result in death, serious personal injury, or property damage caused by incorrect operation of the equipment. These must be observed for safe operation. Caution Instructions that, if ignored, could result in personal injury or property damage caused by incorrect operation of the equipment.
Page 11: Touch-Enabled Device Users (Windows)
Touch-enabled Device Users (Windows) For touch actions, you need to replace "right-click" in this document with the action set on the operating system. For example, if the action is set to "press and hold" on your operating system, replace "right-click" with "press and hold."...
Page 12: Trademarks And Licenses
(1998) are either registered trademarks or trademarks of Adobe Systems Incorporated in the United States and/or other countries. • Bluetooth is a trademark of Bluetooth SIG, Inc., U.S.A. and licensed to Canon Inc. • Autodesk and AutoCAD are registered trademarks or trademarks of Autodesk, Inc., and/or its subsidiaries and/or affiliates in the USA and/or other countries.
Page 13 Apache License Version 2.0, January 2004 http://www.apache.org/licenses/ TERMS AND CONDITIONS FOR USE, REPRODUCTION, AND DISTRIBUTION 1. Definitions. "License" shall mean the terms and conditions for use, reproduction, and distribution as defined by Sections 1 through 9 of this document. "Licensor" shall mean the copyright owner or entity authorized by the copyright owner that is granting the License.
Page 14 2. Grant of Copyright License. Subject to the terms and conditions of this License, each Contributor hereby grants to You a perpetual, worldwide, non-exclusive, no-charge, royalty-free, irrevocable copyright license to reproduce, prepare Derivative Works of, publicly display, publicly perform, sublicense, and distribute the Work and such Derivative Works in Source or Object form. 3.
Page 15 7. Disclaimer of Warranty. Unless required by applicable law or agreed to in writing, Licensor provides the Work (and each Contributor provides its Contributions) on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied, including, without limitation, any warranties or conditions of TITLE, NON-INFRINGEMENT, MERCHANTABILITY, or FITNESS FOR A PARTICULAR PURPOSE.
Page 16 Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met: * Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer. * Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution.
Page 17 Use is subject to license terms below. This distribution may include materials developed by third parties. Sun, Sun Microsystems, the Sun logo and Solaris are trademarks or registered trademarks of Sun Microsystems, Inc. in the U.S. and other countries. Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met: * Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer.
Page 18 TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. ---- Part 6: Cisco/BUPTNIC copyright notice (BSD) ----- Copyright (c) 2004, Cisco, Inc and Information Network Center of Beijing University of Posts and Telecommunications.
Page 19 SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
Page 20 FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
Page 21 MIT License Copyright (c) 1998, 1999, 2000 Thai Open Source Software Center Ltd Permission is hereby granted, free of charge, to any person obtaining a copy of this software and associated documentation files (the "Software"), to deal in the Software without restriction, including without limitation the rights to use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of the Software, and to permit persons to whom the Software is furnished to do so, subject to the following conditions:...
Page 22 CONCERNING THE MERCHANTABILITY OF THIS SOFTWARE OR ITS FITNESS FOR ANY PARTICULAR PURPOSE. (1) Red Hat Incorporated Copyright (c) 1994-2009 Red Hat, Inc. All rights reserved. This copyrighted material is made available to anyone wishing to use, modify, copy, or redistribute it subject to the terms and conditions of the BSD License.
Page 23 The FreeType Project is distributed in several archive packages; some of them may contain, in addition to the FreeType font engine, various tools and contributions which rely on, or relate to, the FreeType Project. This license applies to all files found in such packages, and which do not fall under their own explicit license.
Page 24 The FreeType Project is copyright (C) 1996-2000 by David Turner, Robert Wilhelm, and Werner Lemberg. All rights reserved except as specified below. 1. No Warranty -------------- THE FREETYPE PROJECT IS PROVIDED `AS IS' WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
Page 25 Discusses general use and applications of FreeType, as well as future and wanted additions to the library and distribution. If you are looking for support, start in this list if you haven't found anything to help you in the documentation. o freetype-devel@nongnu.org Discusses bugs, as well as engine internals, design issues, specific licenses, porting, etc.
Page 26 THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL COPYRIGHT HOLDERS AND CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;...
Page 27: Basic Operation
Basic Operation Printing Photos from a Computer Printing Photos from a Smartphone/Tablet Printing a Disc Label from a Computer...
Page 28: Printing Photos From A Computer
Printing Photos from a Computer This section describes how to print photos with Easy-PhotoPrint Editor. 1. Open paper support (A) and pull out paper support extension (B). 2. Open the feed slot cover (C). 3. Slide right paper guide (D) to open both paper guides. 4.
Page 29 5. Slide right paper guide (D) to align with both sides of paper stack. 6. Close feed slot cover (C) gently. After closing the feed slot cover, the paper information registration screen for the rear tray appears on the LCD.
Page 30 7. Press the OK button. 8. Use the button to select the size of the loaded paper on the rear tray, then press the OK button. Note • The (asterisk) on the LCD indicates the current setting. 9. Use the button to select the type of the loaded paper on the rear tray, then press the OK button.
Page 31 From the Start menu, select (All apps >) Canon Utilities > Easy-PhotoPrint Editor. For macOS: From the Go menu in Finder, select Application and double-click the Canon Utilities folder, the Easy- PhotoPrint Editor folder, and then the Easy-PhotoPrint Editor icon.
Page 32 15. Specify number of copies and other options under Print Settings (K). For Windows: Specify the number of copies, your model name, the paper size, and other options. For macOS: Specify the number of copies, the paper size, and other options. Note •...
Page 33 Note • Easy-PhotoPrint Editor lets you easily create and print original collages, cards, or calendars using your favorite photos. Easy-PhotoPrint Editor Guide...
Page 34: Printing Photos From A Smartphone/Tablet
Printing Photos from a Smartphone/Tablet This section describes how to print photos with Canon PRINT Inkjet/SELPHY. For details on how to download Canon PRINT Inkjet/SELPHY, see below. Print Photos from Your Smartphone 1. Open paper support (A) and pull out paper support extension (B).
Page 35 5. Slide right paper guide (D) to align with both sides of paper stack. 6. Close feed slot cover (C) gently. After closing the feed slot cover, the paper information registration screen for the rear tray appears on the LCD.
Page 36 10. Pull out paper output tray (E) and extend paper output support (F). Be sure to pull out the paper output tray before printing. If not, printing will not start. 11. Start (Canon PRINT Inkjet/SELPHY) from your smartphone/tablet. 12. Select Photo Print on Canon PRINT Inkjet/SELPHY.
Page 37 The list of photos saved on your smartphone/tablet is displayed. 13. Select a photo. You can also select multiple photos at once. 14. Specify the number of copies, paper size, etc. 15. Select Print.
Page 38: Printing A Disc Label From A Computer
From the Start menu, select (All apps >) Canon Utilities > Easy-PhotoPrint Editor. For macOS: From the Go menu in Finder, select Application and double-click the Canon Utilities folder, the Easy- PhotoPrint Editor folder, and then the Easy-PhotoPrint Editor icon.
Page 39 5. Click Browse (E) in From computer: and select folder with photos you want to print. 6. Click photos (F) you want to print and select Open (G). 7. Edit disc label and select Next (H). You can change the background or add texts. Easy-PhotoPrint Editor Guide...
Page 40 8. Specify number of copies and other options under Print Settings (I). For Windows: Specify the number of copies, your printer name, and other options. For macOS: Specify the number of copies and other options. 9. Start printing. For Windows: Click Print (J).
Page 41 10. When message prompting you to load printable disc appears on printer's LCD, remove cassette from printer and then detach multi-purpose tray from back of cassette. Insert the removed cassette back into the printer.
Page 42 11. Push paper output tray (K) all the way in. 12. Place printable disc on multi-purpose tray. 1. WITH PRINT SIDE FACING UP, place printable disc, and press it against lock (L) at bottom. 2. While pressing down lock with printable disc, insert top of printable disc into slits (M).
Page 43 13. Place multi-purpose tray on multi-purpose tray guide. 14. Insert multi-purpose tray straight in in horizontal direction until arrow ( ) on multi- purpose tray guide is approximately aligned with arrow ( ) on multi-purpose tray. 15. Press OK button on printer. The multi-purpose tray is drawn into the printer and printing will start.
Page 44 17. While pressing down lock (L), take out printable disc from slits (M) on multi-purpose tray, and remove it. 18. Pull paper output tray (K) towards you until it aligns with operation panel (N). Note • Easy-PhotoPrint Editor enables you to print photos onto the disc label with various layouts. Easy-PhotoPrint Editor Guide...
Page 45: Network
Network Available Connection Methods The following connection methods are available on the printer. • Wireless Connection Connect the printer and devices (e.g. computer/smartphone/tablet) using a wireless router. If you have a wireless router, we recommend you use one for wireless connection. ◦...
Page 46 Note • You can connect the printer and computer using a USB cable (USB connection). Prepare a USB cable. For details, see Connects to Another Computer via LAN/Changes from USB to LAN Connection. Network Connection Settings/Setup Perform connection setup for the printer and computer/smartphone/tablet. For more on setup procedure, click here.
Page 47 Notice/Restriction See below for details. • Restrictions on network settings: Restrictions • Notices when printing using web service: Notice for Web Service Printing...
Page 48: Restrictions
Restrictions When connecting another device while a device (such as a computer) is already connected to the printer, connect it using the same connection method as the connected device. If you connect using a different connection method, the connection to the device in use will be disabled. Connection Using a Wired Network cannot be performed on printers that do not support a wired connection.
Page 49 • If you connect a device and the printer using Wireless Direct, Internet connection may become unavailable depending on your environment. In that case, web services for the printer cannot be used. • In Wireless Direct mode, you can connect up to five devices at the same time. If you try to connect a sixth device while five devices are already connected, an error will appear.
Page 50: Network Connection Tips
Network Connection Tips Default Network Settings Detect Same Printer Name Connects to Another Computer via LAN/Changes from USB to LAN Connection Printing Network Settings Reconfiguration Method of LAN Connection/Reconfiguration Method of Wi-Fi Connection...
Page 51: Default Network Settings
XXXXXXXXXXXX Enable/disable IPv6 Enable Enable/disable WSD Enable Timeout setting 15 minutes Enab./disab. Bonjour Enable Service name Canon TS700 series LPR setting Enable RAW protocol Enable LLMNR Enable PictBridge commun. (Enable/disable) Enable DRX setting (Wired LAN) Enable ("XX" represents alphanumeric characters.) * Default value depends on printer.
Page 52 Confirm request Displayed *1 "ab" is specified at random and "XX" represents last two digits of printer's MAC address. (The value is specified when the printer is turned on for the first time.) *2 The password is specified automatically when the printer is turned on for the first time.
Page 53: Detect Same Printer Name
Detect Same Printer Name When the printer is detected during setup, plural printers with the same name may appear on the results screen. Select a printer with checking the printer settings against those on detection result screen. • For Windows: Check the printer's MAC address or serial to select the correct printer from the results.
Page 54: Connects To Another Computer Via Lan/Changes From Usb To Lan Connection
Connects to Another Computer via LAN/Changes from USB to LAN Connection To connect an additional computer to the printer via LAN, or to change from USB to LAN connection, perform setup from the web page. For Windows, you can perform setup using the Setup CD-ROM.
Page 55: Printing Network Settings
Network Diagnostics Network diagnostics ― Diagnostic Result Diagnostic result XXXXXXXX Result Codes Result codes XXXXXXXX Result Code Details Result code details http://canon.com/ijnwt Wireless LAN Wireless LAN Enable/Disable Infrastructure Infrastructure Enable/Disable 3-2-1 Signal Strength Signal strength 0 to 100 [%] 3-2-2...
Page 56 3-2-3 Frequency Frequency XX (GHz) 3-2-4 MAC Address MAC address XX:XX:XX:XX:XX:XX 3-2-5 Connection Connection status Active/Inactive 3-2-6 SSID SSID Wireless LAN network name (SSID) 3-2-7 Channel Channel XX (1 to 13) 3-2-8 Encryption Encryption method None/WEP/TKIP/AES 3-2-9 WEP Key Length WEP key length (bits) Inactive/128/64 3-2-10...
Page 57 3-2-26 Default Gateway1 Default gateway 1 XXXX:XXXX:XXXX:XXXX XXXX:XXXX:XXXX:XXXX 3-2-27 Default Gateway2 Default gateway 2 XXXX:XXXX:XXXX:XXXX XXXX:XXXX:XXXX:XXXX 3-2-28 Default Gateway3 Default gateway 3 XXXX:XXXX:XXXX:XXXX XXXX:XXXX:XXXX:XXXX 3-2-29 Default Gateway4 Default gateway 4 XXXX:XXXX:XXXX:XXXX XXXX:XXXX:XXXX:XXXX 3-2-33 IPsec IPsec setting Active 3-2-34 Security Protocol Security method ESP/ESP &...
Page 58 MAC Address MAC address XX:XX:XX:XX:XX:XX Connection Wired LAN status Active/Inactive TCP/IPv4 TCP/IPv4 Enable IP Address IP address XXX.XXX.XXX.XXX Subnet Mask Subnet mask XXX.XXX.XXX.XXX Default Gateway Default gateway XXX.XXX.XXX.XXX TCP/IPv6 TCP/IPv6 Enable/Disable Link Local Address Link local address XXXX:XXXX:XXXX:XXXX XXXX:XXXX:XXXX:XXXX Link Local Prefix Link local prefix length Length 4-10...
Page 59 4-21 Default Gateway4 Default gateway 4 XXXX:XXXX:XXXX:XXXX XXXX:XXXX:XXXX:XXXX 4-25 IPsec IPsec setting Active 4-26 Security Protocol Security method ESP/ESP & AH/AH 4-27 Wired LAN DRX Discontinuous recep- Enable/Disable tion (wired LAN) Other Settings Other settings – Printer Name Printer name Printer name (Up to 15 alphanumeric characters) Wireless Direct Dev- Device name for wire-...
Page 60 Bluetooth Bluetooth settings ― Bluetooth Setting Bluetooth Enable/Disable Bluetooth Device Ad- Bluetooth device ad- XXXXXXXX dress dress of the printer Bluetooth Device Name Bluetooth device name XXXXXXXX of the printer Printer Log Service Printer log service ― Unsent Usage Logs Number of unsent us- 0 to 200 age logs...
Page 61: Reconfiguration Method Of Lan Connection/Reconfiguration Method Of Wi-Fi Connection
Reconfiguration Method of LAN Connection/Reconfiguration Method of Wi-Fi Connection Reconfiguration Method of LAN Connection Reconfiguration Method of Wi-Fi Connection Reconfiguration Method of LAN Connection Follow either procedure below to change LAN connection method (wired or Wi-Fi). • For Windows: ◦ Redo setup using the Setup CD-ROM or from the web page. ◦...
Page 62: Ij Network Device Setup Utility (Macos)
IJ Network Device Setup Utility (macOS) IJ Network Device Setup Utility Starting Up IJ Network Device Setup Utility Diagnosing and Repairing Network Settings List of Models Which Does Not Support Diagnosis and Repair Function...
Page 63: Ij Network Device Setup Utility
IJ Network Device Setup Utility If anything is wrong with connection, IJ Network Device Setup Utility diagnoses the settings of the printer and those of computer on which it is installed. In addition, IJ Network Device Setup Utility restores the status of the printer and computer.
Page 64: Starting Up Ij Network Device Setup Utility
Starting Up IJ Network Device Setup Utility Start up Launchpad, select Canon Utilities, and then select IJ Network Device Setup Utility. When you start up IJ Network Device Setup Utility, the screen below appears. Enter the password specified for your computer and select Install Helper. IJ Network Device Setup Utility starts diagnosis and repair of network.
Page 65: Diagnosing And Repairing Network Settings
Diagnosing and Repairing Network Settings IJ Network Device Setup Utility diagnoses and repairs computer settings or connection between the computer and printer when a problem (e.g. cannot print from a printer on the network) occurs. Important • Some models do not support diagnosis and repair function. For details: List of Models Which Does Not Support Diagnosis and Repair Function IJ Network Device Setup Utility starts checking the computer settings when it starts up.
Page 66: List Of Models Which Does Not Support Diagnosis And Repair Function
List of Models Which Does Not Support Diagnosis and Repair Function The following models does not support "Diagnose and Repair" function of IJ Network Device Setup Utility. • G4000 series • PRO-500 series • PRO-1000 series • MB2100 series • MB2700 series •...
Page 67: Handling Paper, Ink Tanks, Multi-Purpose Tray, Etc
Handling Paper, Ink Tanks, Multi-purpose Tray, etc. Loading Paper Placing Multi-purpose Tray Replacing Ink Tanks...
Page 68: Loading Paper
Loading Paper Paper Sources Loading Paper in the Rear Tray Loading Paper in the Cassette Loading Envelopes in Rear Tray...
Page 69: Paper Sources
Paper Sources The printer has two paper sources for feeding paper, the rear tray (A) and cassette (B). You can load all supported paper on the rear tray. Supported Media Types You can load A4, B5, A5, or Letter-sized plain paper in the cassette. Note •...
Page 70: Loading Paper In The Rear Tray
For details on the Canon genuine paper, see Supported Media Types. • You can use general copy paper or Canon Red Label Superior WOP111/Canon Océ Office Colour Paper SAT213. For the page size and paper weight you can use for this printer, see Supported Media Types.
Page 71 3. Open the feed slot cover (C). 4. Slide right paper guide (D) to open both paper guides. 5. Load paper stack in portrait orientation WITH PRINT SIDE FACING UP.
Page 72 6. Slide right paper guide (D) to align with both sides of paper stack. Do not slide the paper guides too hard against the paper. The paper may not be fed properly. Important • Always load paper in portrait orientation (E). Loading paper in landscape orientation (F) can cause paper jams.
Page 73 7. Close feed slot cover (C) gently. Important • If the feed slot cover is open, paper cannot be fed. Be sure to close the feed slot cover. After closing the feed slot cover, the paper information registration screen for the rear tray appears on the LCD.
Page 74 Note • The (asterisk) on the LCD indicates the current setting. 10. Use the button to select the type of the loaded paper on the rear tray, then press the OK button. Follow the instructions of any messages displayed to register the paper information. 11.
Page 75: Loading Paper In The Cassette
Note • In the cassette, be sure to load only plain paper. • You can use general copy paper or Canon Red Label Superior WOP111/Canon Océ Office Colour Paper SAT213. For the page size and paper weight you can use for this printer, see Supported Media Types.
Page 76 3. Remove the cassette cover (B). Lift the cassette cover straight up and remove it. 4. Slide paper guides (C) in front and (D) on right to open guides. 5. Load paper stack in portrait orientation WITH PRINT SIDE FACING DOWN, and place it in center of cassette.
Page 77 Note • Align the paper stack with the edge of the cassette as shown in the figure below. If the paper stack is in contact with the protrusion (G), the paper may not be fed properly. 6. Slide front paper guide (C) to align it with paper stack. Align paper guide with where it clicks into place.
Page 78 Note • Do not load sheets of paper higher than the load limit mark (H). • Keep the paper stack height below the tabs (I) of the paper guides. 8. Mount cassette cover (B) and insert cassette into printer. Push the cassette into the printer until it stops. After inserting the cassette into the printer, the paper information registration screen for the cassette appears on the LCD.
Page 79 9. Press the OK button. 10. Use the button to select the size of the loaded paper in the cassette, then press the OK button. Note • The (asterisk) on the LCD indicates the current setting. 11. Check media type and press OK button. Follow the instructions of any messages displayed to register the paper information.
Page 80 Note • To prevent incorrect printing, this printer has a function that detects whether the settings for the paper loaded in the cassette matches the paper settings. Before printing, make print settings in accordance with the paper settings. When this function is enabled, an error message is displayed if these settings do not match to prevent incorrect printing.
Page 81: Loading Envelopes In Rear Tray
Loading Envelopes in Rear Tray You can load Envelope DL and Envelope Com 10 on the rear tray. The address is automatically rotated and printed according to the envelope's direction by specifying with the printer driver properly. Important • Printing from a PictBridge (Wi-Fi) compliant device is not supported. •...
Page 82 3. Open the feed slot cover (C). 4. Slide right paper guide (D) to open both paper guides. 5. Load envelopes in portrait orientation WITH PRINT SIDE FACING UP. Up to 10 envelopes can be loaded at once. Fold flap of the envelope and load the envelope in portrait orientation with the address side facing up. 6.
Page 83 Do not slide the paper guides too hard against the envelopes. The envelopes may not be fed properly. Note • Do not load envelopes higher than the load limit mark (E). 7. Close feed slot cover (C) gently. Important • If the feed slot cover is open, paper cannot be fed. Be sure to close the feed slot cover.
Page 84 After closing the feed slot cover, the paper information registration screen for the rear tray appears on the LCD. 8. Press the OK button. 9. Use button to select size of loaded envelopes on rear tray and press OK button. Note •...
Page 85 Note • To prevent incorrect printing, this printer has a function that detects whether the settings for the paper loaded on the rear tray matches the paper settings. Before printing, make print settings in accordance with the paper settings. When this function is enabled, an error message is displayed if these settings do not match to prevent incorrect printing.
Page 86: Placing Multi-Purpose Tray
Placing Multi-purpose Tray Cautions When Printing with Multi-purpose Tray Placing a Printable Disc Placing Printable Nail Stickers How to Detach / Attach Multi-purpose Tray...
Page 87: Cautions When Printing With Multi-Purpose Tray
Cautions When Printing with Multi-purpose Tray Cautions Common to using Multi-purpose Tray • Be sure to use the multi-purpose tray supplied with this printer. • Do not mount the multi-purpose tray while the printer is in operation. • Do not remove the multi-purpose tray while the printer is in operation. Doing so may damage the printer, the multi-purpose tray, or the media.
Page 88: Placing A Printable Disc
Placing a Printable Disc Before Placing a Printable Disc Placing a Printable Disc Removing a Printable Disc...
Page 89: Before Placing A Printable Disc
Before Placing a Printable Disc A printable disc differs from regular disc (BD/DVD/CD, etc.) in that its label surface has been specially processed or printing by an inkjet printer. The following items are needed to print onto the printable disc. •...
Page 90: Placing A Printable Disc
Placing a Printable Disc To print onto a printable disc, place it on the supplied multi-purpose tray, and then insert it into the printer. Important • Do not mount the multi-purpose tray until the message prompting you to load the printable disc appears.
Page 91 Note • After inserting the cassette into the printer, if a message appears on the screen, complete registration of paper information by pressing the OK button. 2. Push paper output tray (A) all the way in. 3. Place printable disc on multi-purpose tray. Important •...
Page 92 2. While pressing down lock with printable disc, insert top of printable disc into slits (D). 4. Place multi-purpose tray on multi-purpose tray guide. 5. Insert multi-purpose tray straight in in horizontal direction until arrow ( ) on multi- purpose tray guide is approximately aligned with arrow ( ) on multi-purpose tray.
Page 93 Note • The multi-purpose tray may be ejected after a certain amount of time passes. In such a case, follow the on-screen instructions to place the multi-purpose tray again.
Page 94: Removing A Printable Disc
Removing a Printable Disc 1. Pull out multi-purpose tray. 2. While pressing down lock (A), take out printable disc from slits (B) on multi-purpose tray, and remove it. Important • Do not touch the printing surface when removing the disc from the multi-purpose tray. Note •...
Page 95 4. Store multi-purpose tray under cassette. How to Detach / Attach Multi-purpose Tray...
Page 96: Placing Printable Nail Stickers
Placing Printable Nail Stickers Before Placing Printable Nail Stickers Placing Printable Nail Stickers Removing Printable Nail Stickers...
Page 97: Before Placing Printable Nail Stickers
Before Placing Printable Nail Stickers The following items are needed to print onto Printable Nail Stickers. • Multi-purpose tray (supplied with the printer) The multi-purpose tray is stored in the back of the cassette. • Printable Nail Stickers (NL-101) Note •...
Page 98: Placing Printable Nail Stickers
Placing Printable Nail Stickers To print onto Printable Nail Stickers, place them on the multi-purpose tray supplied with the printer, and then insert them into the printer. Important • Do not mount the multi-purpose tray until the message prompting you to load Printable Nail Stickers appears.
Page 99 2. Push paper output tray (A) all the way in. 3. Place Printable Nail Stickers on multi-purpose tray. Important • Check that there is no dirt on the multi-purpose tray before placing Printable Nail Stickers on it. • To prevent getting dirt or fingerprints on Printable Nail Stickers, hold the stickers by their edges. If the print side gets any dirt or is damaged, it may cause poor print quality.
Page 100 2. While pressing down lock with Printable Nail Stickers, insert two tabs (D) on top into slits (E) on multi-purpose tray. 4. Place multi-purpose tray on multi-purpose tray guide. 5. Insert multi-purpose tray straight in in horizontal direction until arrow ( ) on multi- purpose tray guide is approximately aligned with arrow ( ) on multi-purpose tray.
Page 101 Note • The multi-purpose tray may be ejected after a certain amount of time passes. In such a case, follow the on-screen instructions to place the multi-purpose tray again.
Page 102: Removing Printable Nail Stickers
Removing Printable Nail Stickers 1. Pull out multi-purpose tray. 2. Remove Printable Nail Stickers. While pressing down lock (A), remove two tabs (B) on the top out of slits (C). Important • Do not touch the printing surface when removing Printable Nail Stickers. Note •...
Page 103 4. Pull paper output tray (D) towards you until it aligns with operation panel (E). Important • If the paper output tray is being pushed into the printer, the normal printing cannot be executable. Be sure to pull the paper output tray towards you until it aligns with the operation panel. 5.
Page 104: How To Detach / Attach Multi-Purpose Tray
How to Detach / Attach Multi-purpose Tray Detaching Multi-purpose Tray 1. Take cassette out of printer and remove cassette cover. Be sure to remove any paper. 2. Turn cassette over and remove multi-purpose tray. Slide the multi-purpose tray, take it out of the six tabs (A), and then lift it. Important •...
Page 105 Attaching Multi-purpose Tray 1. Take cassette out of printer and remove cassette cover. Be sure to remove any paper. 2. Turn cassette over and attach multi-purpose tray to it. Turn the multi-purpose tray so that its underside faces up, align it with the six tabs (A) in the orientation shown in the figure below, and then slide to attach.
Page 106: Replacing Ink Tanks
Replacing Ink Tanks Replacing Ink Tanks Checking Ink Status on the LCD Ink Tips...
Page 107: Replacing Ink Tanks
Replacing Ink Tanks When remaining ink cautions or errors occur, the message will appear on the LCD to inform you of the error. In this state, the printer cannot print. Take appropriate action according to the message. An Error Occurs Note •...
Page 108 Push the tab (A) and lift the ink tank to remove. Important • Do not touch other parts besides the ink tanks. • Handle the ink tank carefully to avoid staining of clothing or the surrounding area. • Discard the empty ink tank according to the local laws and regulations regarding disposal of consumables.
Page 109 5. Hold the ink tank with the orange protective cap (E) pointing up while being careful not to block the Y-shape air hole (D). 6. Lift up the tab on the orange protective cap (E) to remove it off GENTLY. Important •...
Page 110 8. Press on the top of the ink tank until the ink tank snaps firmly into place. Important • You cannot print if the ink tank is installed in the wrong position. Be sure to install the ink tank in the correct position according to the label on the print head holder.
Page 111 Note • If the error message appears on the LCD after the top cover is closed, take appropriate action. An Error Occurs • When you start printing after replacing the ink tank, the printer starts cleaning the print head automatically. Do not perform any other operations until the printer completes the cleaning of the print head.
Page 112: Checking Ink Status On The Lcd
Checking Ink Status on the LCD You can also check ink status on the LCD. A symbol appears in area A in case of any messages about the remaining ink level. Example: The ink is running low. Prepare a new ink tank. The resulting print quality may not be satisfactory, if printing is continued under this condition.
Page 113: Ink Tips
Ink may be used for purposes other than printing. When you use the Canon printer for the first time after you install the bundled ink tanks, the printer consumes a small amount of ink in the amount to enable printing by filling the nozzles of the Print Head with ink.
Page 114: If Printing Is Faint Or Uneven
If Printing Is Faint or Uneven Maintenance Procedure Printing the Nozzle Check Pattern Examining the Nozzle Check Pattern Cleaning the Print Head Deep Print Head Cleaning Aligning the Print Head...
Page 115: Maintenance Procedure
Maintenance Procedure If print results are blurred, colors are not printed correctly, or print results are unsatisfactory (e.g. misaligned printed ruled lines), perform the maintenance procedure below. Important • Do not rinse or wipe the print head and ink tank. This can cause trouble with the print head and ink tank.
Page 116 • When you have performed the procedure until step 4 and the problem has not been resolved, turn off the power and clean the print head deeply again after 24 hours. If the problem is still not resolved, the print head may be damaged. Contact your nearest Canon service center to request a repair.
Page 117 Adjusting Print Head Position...
Page 118: Printing The Nozzle Check Pattern
Printing the Nozzle Check Pattern Print the nozzle check pattern to determine whether the ink ejects properly from the print head nozzle. Note • If the remaining ink level is low, the nozzle check pattern will not be printed correctly. Replace the ink tank whose ink is low.
Page 119: Examining The Nozzle Check Pattern
Examining the Nozzle Check Pattern Examine the nozzle check pattern, and clean the print head if necessary. 1. Check if there are missing lines in the pattern A or horizontal white streaks in the pattern B. If there are missing lines in the pattern A: C: Good D: Bad (lines are missing) If there are horizontal white streaks in the pattern B:...
Page 120: Cleaning The Print Head
Cleaning the Print Head Clean the print head if lines are missing or if horizontal white streaks are present in the printed nozzle check pattern. Cleaning unclogs the nozzles and restores the print head condition. Cleaning the print head consumes ink, so clean the print head only when necessary. Check that printer is turned on.
Page 121: Deep Print Head Cleaning
If the problem is not resolved, turn off the power and clean the print head deeply again after 24 hours. If the problem is still not resolved, the print head may be damaged. Contact your nearest Canon service center to request a repair.
Page 122: Aligning The Print Head
Aligning the Print Head If printed ruled lines are misaligned or print results are otherwise unsatisfactory, adjust the print head position. Note • If the remaining ink level is low, the print head alignment sheet will not be printed correctly. Replace the ink tank whose ink is low.
Page 123: Performing Maintenance Functions From Your Computer (Macos)
Performing Maintenance Functions from Your Computer (macOS) Opening Remote UI for Maintenance Cleaning the Print Heads Adjusting Print Head Position Checking Ink Status from Your Computer...
Page 124: Opening Remote Ui For Maintenance
Opening Remote UI for Maintenance You can perform maintenance of printer and change the settings from a Remote UI. The following is the procedure to open a Remote UI. 1. Open System Preferences, and select Printers & Scanners 2. Select your model from the printer list, and click Options & Supplies... 3.
Page 125: Cleaning The Print Heads
Cleaning the Print Heads The print head Cleaning function allows you to clear up clogged print head nozzles. Perform print head Cleaning if printing results are not satisfactory or if a specific color fails to print, even though there is enough ink.
Page 126 2. Click Deep cleaning Before performing Deep Cleaning, check the following items: Check whether the printer is on and open the printer's cover. Check the following items for each ink. Then, if necessary, perform Deep cleaning. • Is there ink remaining in the tank? •...
Page 127: Adjusting Print Head Position
Adjusting Print Head Position Any error in the print head installation position can cause color and line shifts. Adjusting the print head position improves print results. Auto head alignment 1. Select Utilities from Remote UI 2. Click Auto head alignment A message appears.
Page 128: Checking Ink Status From Your Computer
Checking Ink Status from Your Computer You can check the detailed information such as the remaining ink level and the ink tank types of your model. If you select Printer status from Remote UI, the ink status appears as an illustration. Estimated ink levels You can check the types and levels of ink.
Page 129: Cleaning
Cleaning Cleaning Exterior Surfaces Cleaning Paper Feed Rollers Cleaning Inside the Printer (Bottom Plate Cleaning) Cleaning Cassette Pads...
Page 130: Cleaning Paper Feed Rollers
2. Press the OK button. The printer starts cleaning. The cleaning will be complete when the paper is ejected. If the problem is not resolved after cleaning the paper feed roller, contact your nearest Canon service center to request a repair.
Page 131: Cleaning Inside The Printer (Bottom Plate Cleaning)
Cleaning Inside the Printer (Bottom Plate Cleaning) Remove stains from the inside of the printer. If the inside of the printer becomes dirty, printed paper may get dirty, so we recommend performing cleaning regularly. You need to prepare: a sheet of A4 or Letter-sized plain paper* * Be sure to use a new piece of paper.
Page 132 After inserting the cassette into the printer, the paper information registration screen is displayed on the LCD. Select A4 or Letter for Size:. 5. Pull out paper output tray (B) and extend paper output support (C). 3. Press the Setup button, use the button to select Maintenance, and press the OK button.
Page 133 Note • When performing Bottom Plate Cleaning again, be sure to use a new piece of paper. If the problem is not resolved after performing cleaning again, the protrusions inside the printer may be stained. Wipe off any ink from the protrusions using a cotton swab or the like. Important •...
Page 134: Overview
Overview Safety Safety Precautions Regulatory Information WEEE (EU & EEA) Handling Precautions Canceling Print Jobs Legal Restrictions on Printing Printer Handling Precautions Transporting Your Printer When Repairing, Lending, or Disposing of the Printer Keeping Print Quality High Main Components and Their Use Main Components Power Supply LCD and Operation Panel...
Page 135: Safety
Safety Safety Precautions Regulatory Information WEEE (EU&EEA)
Page 136: Safety Precautions
Safety Precautions Safety Precautions • This manual contains important notices and safety precautions about your printer. Do not use the printer in ways other than described in the accompanying manuals, as this may result in fire, electric shock or other unexpected accidents. Safety standard marks and declarations are only valid for the supported voltages and frequencies in the applicable countries or regions.
Page 137 • In case ink gets in contact with eyes, rinse with water immediately. In case ink gets in contact with skin, wash with soap and water immediately. If irritation to eyes or skin persists, obtain medical advice immediately. • Moving the printer •...
Page 138 Power Supply • Keep the area around the power outlet clear at all times so you can easily unplug the power cord if necessary. • Never remove the plug by pulling on the cord. General Notices • Do not tilt the printer, stand it on end, or turn it upside down. This may cause ink to leak. •...
Page 139: Regulatory Information
20cm between the radiator and persons body (excluding extremities: hands, wrists, feet and ankles) and must not be colocated or operated with any other antenna or transmitter. Canon U.S.A., Inc. One Canon Park Melville, New York 11747...
Page 140 Interference Do not use the printer around medical equipment or other electronic devices. Signals from the printer may interfere with the correct operation of these devices.
Page 141: Weee (Eu&Eea)
For more information about where you can drop off your waste equipment for recycling, please contact your local city office, waste authority, approved WEEE scheme or your household waste disposal service. For more information regarding return and recycling of WEEE products, please visit www.canon- europe.com/weee.
Page 142 U kunt ook het schema voor de afvoer van afgedankte elektrische en elektronische apparatuur (AEEA) raadplegen. Ga voor meer informatie over het inzamelen en recyclen van afgedankte elektrische en elektronische apparatuur naar www.canon- europe.com/weee.
Page 143 RAEE autorizado o con el servicio de recogida de basuras doméstico. Si desea más información acerca de la devolución y reciclado de RAEE, visite la web www.canon-europe.com/weee. Només per a la Unió Europea i a l’Espai Econòmic Europeu (Noruega, Islàndia i Liechtenstein)
Page 144 Yderligere oplysninger om, hvor du kan bortskaffe dit elektronikaffald med henblik på genanvendelse, får du hos de kommunale renovationsmyndigheder. Yderligere oplysninger om returnering og genanvendelse af affald af elektrisk og elektronisk udstyr får du ved at besøge www.canon- europe.com/weee.
Page 145 Du kan få mer informasjon om hvor du kan avhende utrangert utstyr til resirkulering ved å kontakte lokale myndigheter, et godkjent WEEE-program eller husholdningens renovasjonsselskap. Du finner mer informasjon om retur og resirkulering av WEEE-produkter på www.canon-europe.com/weee. Vain Euroopan unionin sekä ETA:n (Norja, Islanti ja Liechtenstein) alueelle.
Page 146 Lisätietoja sähkö- ja elektroniikkalaiteromun keräyksestä ja kierrätyksestä on osoitteessa www.canon-europe.com/weee. Endast för Europeiska unionen och EES (Norge, Island och Liechtenstein) Den här symbolen visar att produkten enligt WEEE-direktivet (2012/19/EU) och nationell lagstiftning inte får sorteras och slängas som hushållsavfall. Den här produkten ska lämnas in på en därför avsedd insamlingsplats, t.ex.
Page 147 WEEE lub skontaktować się z przedsiębiorstwem zajmującym się wywozem odpadów domowych. Więcej informacji o zwracaniu i recyklingu zużytego sprzętu elektrycznego i elektronicznego znajduje się w witrynie www.canon-europe.com/weee. Platí len pre štáty Európskej únie a EHP (Nórsko, Island a Lichtenštajnsko)
Page 148 EEIA struktūru vai sadzīves atkritumu apsaimniekošanas iestādi. Lai saņemtu plašāku informāciju par elektrisko un elektronisko iekārtu nodošanu pārstrādei, apmeklējiet tīmekļa vietni www.canon-europe.com/weee. Tik Europos Sąjungai ir EEE (Norvegijai, Islandijai ir Lichtenšteinui) Šis ženklas reiškia, kad gaminio negalima išmesti su buitinėmis atliekomis, kaip yra nustatyta Direktyvoje...
Page 149 į savo miesto valdžios institucijas, atliekų tvarkymo organizacijas, patvirtintų EEĮ atliekų sistemų arba jūsų buitinių atliekų tvarkymo įstaigų atstovus. Išsamesnės informacijos apie EEĮ atliekų grąžinimo ir perdirbimo tvarką galite rasti apsilankę tinklalapyje www.canon- europe.com/weee. Samo za Evropsko unijo in EGP (Norveška, Islandija in Lihtenštajn) Ta simbol pomeni, da tega izdelka v skladu z direktivo OEEO (2012/19/EU) in državno zakonodajo ne...
Page 150 DEEE aprobată sau serviciul de colectare a deşeurilor menajere. Pentru mai multe informaţii privind returnarea şi reciclarea produselor DEEE, vizitaţi www.canon-europe.com/ weee. Samo za Europsku uniju i EEZ (Norveška, Island i Lihtenštajn) Ovaj simbol pokazuje da se ovaj proizvod ne smije odlagati s kućnim otpadom sukladno WEEE Direktivi...
Page 151 će doprineti efikasnom korišćenju prirodnih resursa. Za više informacija o tome gde možete da predate vašu staru opremu radi recikliranje, vas molimo, da kontaktirate lokalne gradske vlasti, komunalne službe, odobreni plan reciklaže ili Gradsku čistoću. Za više informacija o vraćanju i recikliranju WEEE proizvoda, posetite stranicu www.canon-europe.com/weee.
Page 152: Handling Precautions
Handling Precautions Canceling Print Jobs Legal Restrictions on Printing Printer Handling Precautions Transporting Your Printer When Repairing, Lending, or Disposing of the Printer Keeping Print Quality High...
Page 153: Legal Restrictions On Printing
Legal Restrictions on Printing Printing or modifying printed copies of the following may be punishable under law. This list is non-exhaustive. When in doubt, check with a local legal representative. • Paper money • Money orders • Certificates of deposit •...
Page 154: Printer Handling Precautions
Printer Handling Precautions Do not place any object on the top cover! Do not place any object on the top cover. It will fall into the rear tray when the top cover is opened and cause the printer to malfunction. Also, place the printer where objects will not fall on it.
Page 155: Transporting Your Printer
Transporting Your Printer When relocating the printer for changing your living place or repairing it, make sure of the following. Important • Pack the printer in a sturdy box so that it is placed with its bottom facing down, using sufficient protective material to ensure safe transport.
Page 156 Important • We recommend to hold and carry out this printer as shown in the figure below. If you hold the cassette, it may fall out of the printer.
Page 157: When Repairing, Lending, Or Disposing Of The Printer
When Repairing, Lending, or Disposing of the Printer If you have entered personal data, passwords and/or other security settings on the printer, such information may be stored in the printer. When sending the printer for repair, lending or transferring the printer to another person, or disposing of the printer, please be sure to follow the steps below in order to delete such information and prevent third parties from accessing it.
Page 158: Keeping Print Quality High
Keeping Print Quality High The key to printing with the optimal printing quality is to prevent the print head from drying or clogging. Always observe the following rules for optimal printing quality. Note • Depending on the type of paper, ink may blur if you trace the printed area with a highlight pen or paint- stick, or bleed if water or sweat comes in contact with the printed area.
Page 159: Main Components And Their Use
Main Components and Their Use Main Components Power Supply LCD and Operation Panel Entering Numbers, Letters, and Symbols...
Page 160: Main Components
Main Components Front View Rear View Inside View Operation Panel...
Page 161: Front View
Front View A: Paper Support Open to load paper in the rear tray. B: Paper Support Extension Extend to load paper in the rear tray. C: Feed Slot Cover Prevents anything from falling into the feed slot. Open it to slide the paper guides, and close it before printing. D: Rear Tray Load paper here.
Page 162 I: Cassette Load A4, B5, A5, or Letter-sized plain paper into the cassette, and insert it into the printer. Loading Paper in the Cassette J: Paper Output Tray Printed paper is ejected. Pull out it before printing. When using the multi-purpose tray to print, insert the paper output tray all the way in by following the message.
Page 163: Rear View
Rear View A: USB Port Plug in the USB cable to connect the printer with a computer. B: Wired LAN Connector Plug in the LAN cable to connect the printer to a LAN. C: Power Cord Connector Plug in the supplied power cord. D: Transport Unit Cover Open when removing jammed paper.
Page 164: Inside View
Inside View A: Top Cover Open to replace an ink tank or to remove jammed paper inside the printer. B: Print Head Holder The print head is pre-installed. Note • For details on replacing an ink tank, see Replacing Ink Tanks.
Page 165: Operation Panel
Operation Panel A: Wireless connect button To set wireless router information in the printer directly from a smartphone or other such device (without having to do any procedures at the router), hold down this button. B: LCD (Liquid Crystal Display) Displays messages, menu items, and the operational status.
Page 166: Power Supply
Power Supply Checking that Power Is On Turning the Printer On and Off Checking the Power Plug/Power Cord Unplugging the Printer...
Page 167: Checking That Power Is On
Checking that Power Is On The ON lamp is lit when the printer is turned on. Even if the LCD is off, if the ON lamp is lit, the printer is on. Note • It may take a while for the printer to start printing immediately after you turn on the printer. •...
Page 168: Turning The Printer On And Off
Turning the Printer On and Off Turning on the printer 1. Press the ON button to turn on the printer. The ON lamp flashes and then remains lit. Confirming that the Power Is On Note • It may take a while for the printer to start printing immediately after you turn on the printer. •...
Page 169 Important • When you unplug the power cord after turning off the printer, be sure to confirm that the ON lamp is off. Note • You can set the printer to automatically turn off when no operations are performed or no print jobs are sent to the printer for a certain interval.
Page 170: Checking The Power Plug/Power Cord
Checking the Power Plug/Power Cord Unplug the power cord once a month to confirm that the power plug/power cord does not have anything unusual described below. • The power plug/power cord is hot. • The power plug/power cord is rusty. •...
Page 171: Unplugging The Printer
Unplugging the Printer To unplug the power cord, follow the procedure below. Important • When you unplug the power cord, press the ON button, then confirm that the ON lamp is off. Unplugging the power cord while the ON lamp is lit or flashing may cause drying or clogging of the print head and print quality may be reduced.
Page 172: Lcd And Operation Panel
LCD and Operation Panel Pressing the Setup button (A) on the operation panel displays the Setup menu screen, which enables you to perform printer settings and maintenance. Selecting a Menu or Setting Item In a menu screen or settings screen, use the button (B) to select an item or option, and then press the OK button (C) to proceed with the procedure.
Page 173 If the icon appears on the LCD, it indicates that Wi-Fi is enabled and the printer is connected to the wireless router. Depending on the signal state, the icon will change. Signal strength: 81 % or more You can use the printer over Wi-Fi without any problems. Signal strength: 51 % or more The problem such as the printer cannot print may occur according to the network status.
Page 174: Entering Numbers, Letters, And Symbols
Entering Numbers, Letters, and Symbols The buttons on the operation panel allow you to enter (or change) characters, numbers, or symbols when setting up the network or making other settings. Switching the Input Mode The current input mode appears at the upper right corner of the LCD. Pressing the Setup button on the operation panel toggles through the input modes in the order lowercase >...
Page 175: Changing Settings
Changing Settings Changing Printer Settings from Your Computer (Windows) Changing Printer Settings from Your Computer (macOS) Changing Settings from Operation Panel...
Page 176: Changing Printer Settings From Your Computer (Macos)
Changing Printer Settings from Your Computer (macOS) Managing the Printer Power Changing the Printer Operation Mode...
Page 177: Managing The Printer Power
Managing the Printer Power Printer power supply is operated from Remote UI. Energy saving settings Energy saving settings allow you to set Auto power off and Auto power on. Auto power off is the function wherein the printer automatically turns itself off, when data is not sent or the printer remains inactive for a certain period.
Page 178: Changing The Printer Operation Mode
Changing the Printer Operation Mode If necessary, switch between various modes of printer operation. 1. Check whether the printer is on and select Device settings from Remote UI 2. If necessary, complete the following settings: Print settings - Prevent paper abrasion The printer can increase the gap between the print head and the paper during high-density printing to prevent paper abrasion.
Page 179: Changing Settings From Operation Panel
Changing Settings from Operation Panel Changing Settings from Operation Panel Setting Items on Operation Panel Print settings LAN settings Bluetooth settings PictBridge settings Other dev. settings Language selection Firmware update Reset setting Feed settings Web service setup ECO settings Quiet setting System information...
Page 180: Changing Settings From Operation Panel
Changing Settings from Operation Panel This section describes the procedure to change the settings in the Device settings screen, taking the steps to specify Prevent abrasion as an example. Note • The (asterisk) on the LCD indicates the current setting. Check that printer is turned on.
Page 181: Setting Items On Operation Panel
Setting Items on Operation Panel Items for Printer Other device settings Language selection Web service setup ECO settings Quiet setting Items for Paper/Printing Print settings Bluetooth settings PictBridge settings Feed settings Items for Maintenance/Management LAN settings Firmware update Reset setting System information...
Page 182: Print Settings
Print settings Select this menu from Device settings in Setup menu. • Prevent abrasion Use this setting only if the print surface becomes smudged. Important • Be sure to set this back to OFF after printing since it may result in lower printing speed or lower print quality.
Page 183: Lan Settings
LAN settings Select this menu from Device settings in Setup menu. Wi-Fi Wireless Direct Wired LAN Print LAN details Wi-Fi • Wi-Fi enab./disable Enables or disables Wi-Fi. • Wi-Fi setup Selects the setup method for Wi-Fi connection. Note • You can also enter this setting menu by selecting Wi-Fi setup from the Setup menu screen. ◦...
Page 184 Wireless Direct • Switch WL Direct Enables/disables Wireless Direct. • Change name (SSID) Changes the identifier (SSID/the printer's name displayed on a Wi-Fi Direct compatible device) for Wireless Direct. • Change password Changes the password for Wireless Direct. • Confirm request Set whether the printer displays the confirmation screen when a Wi-Fi Direct compatible device is connecting the printer.
Page 185 Note • You cannot use the same printer name as that already used for other LAN connected devices. • You cannot use a hyphen for the initial or last character of the printer name. • TCP/IP settings Performs IPv4 or IPv6 setting. •...
Page 186 Setting items for printing from a PictBridge (Wi-Fi) compliant device. ◦ Enable/disable Selecting Enable allows you to print from a PictBridge (Wi-Fi) compliant device. ◦ Timeout setting Specifies the timeout length. • DRX setting Selecting Enable allows you to activate discontinuous reception when the printer is connected to a device compatible with wired LAN.
Page 187: Other Dev. Settings
Other dev. settings Select this menu from Device settings in Setup menu. • Key repeat Selecting ON lets you quickly display candidate numbers or characters by holding down the button during character entry.
Page 188: Language Selection
Language selection Changes the language for LCD messages and menus. Japanese / English / German / French / Italian / Spanish / Dutch / Portuguese / Norwegian / Swedish / Danish / Finnish / Russian / Ukrainian / Polish / Czech / Slovak / Hungarian / Slovene / Croatian / Romanian / Bulgarian / Turkish / Greek / Estonian / Latvian / Lithuanian / Simplified Chinese / Traditional Chinese / Korean / Indonesian / Vietnamese...
Page 189: Firmware Update
Firmware update Select this menu from Device settings in Setup menu. You can update the firmware of the printer, check the firmware version, or perform settings of a notification screen. Important • When you use this function, make sure the printer is connected to the internet. Note •...
Page 190: Reset Setting
Reset setting Select this menu from Device settings in Setup menu. Returns all settings you made to the printer back to the default. However, some data may not be changed, depending on the current usage state of your printer. Important •...
Page 191: Feed Settings
Feed settings Select this menu from Setup menu. By registering the paper size and the media type loaded on the rear tray or in the cassette, you can prevent the printer from misprinting by displaying the message before printing starts when the paper size or the media type of the loaded paper differs from the print settings.
Page 192: Web Service Setup
Web service setup Select this menu from Setup menu. • Connection setup The following setting items are available. ◦ GoogleCloudPrint Registers/Deletes the printer to/from Google Cloud Print. • DNS server setup Performs settings for a DNS server. Select Auto setup or Manual setup. If you select Manual setup, follow the display on the LCD to perform settings.
Page 193: Eco Settings
ECO settings This setting allows you to turn on/off the printer automatically to save electricity. Turning off Printer Automatically Turning on Printer Automatically Turning off Printer Automatically You can enable the printer to turn off automatically when no operation is made or no printing data is sent to the printer for a specified period of time.
Page 194: Quiet Setting
Quiet setting Enables this function on the printer if you want to reduce the operating noise, such as when printing at night. Follow the procedure below to perform setting. Check that printer is turned on. 2. Press the Setup button. The Setup menu screen is displayed.
Page 195: System Information
System information Select this menu from Setup menu. • Current version Displays the current firmware version. • Printer name Displays the printer name currently specified. • Serial number Displays the printer serial number.
Page 196: Specifications
Specifications General Specifications Printing resolution (dpi) 4800* (horizontal) x 1200 (vertical) * Ink droplets can be placed with a pitch of 1/4800 inch at minimum. Interface USB Port: Hi-Speed USB * Network Port: Wired LAN: 100BASE-TX / 10BASE-T Wi-Fi: IEEE802.11n / IEEE802.11g / IEEE802.11b * A computer that complies with Hi-Speed USB standard is required.
Page 197 ◦ Other sizes: 0.14 in. (3.4 mm) * For printable area of envelope, see below. Envelopes Auto duplex printing: • Top margin: 0.20 in. (5.0 mm) • Bottom margin: 0.20 in. (5.0 mm) • Left margin: ◦ Letter: 0.26 in. (6.4 mm) ◦...
Page 198 Network Specifications Communication protocol TCP/IP Wired LAN Supported Standards: IEEE802.3u (100BASE-TX) / IEEE802.3 (10BASE-T) Transfer speed: 10 M/100 Mbps (auto switching) Wi-Fi Supported Standards: IEEE802.11n / IEEE802.11g / IEEE802.11b Frequency bandwidth: 2.4 GHz Channel: 1-11 or 1-13 * Frequency bandwidth and available channels differ depending on country or region.
Page 199 XGA 1024 x 768 Other Supported OS iOS, Android, Windows 10 Mobile Some functions may not be available with the supported OS. Refer to the Canon web site for details. Mobile Printing Capability Apple AirPrint Google Cloud Print PIXMA Cloud Link...
Page 200: Information About Paper
Information about Paper Supported Media Types Paper Load Limit Unsupported Media Types Handling Paper Print Area...
Page 201: Supported Media Types
Canon website. • Genuine Canon paper is not available in some countries or regions. Note that in the United States, Canon paper is not sold by model number. Instead, purchase paper by name.
Page 202 Paper other than genuine Canon paper • Plain Paper (including recycled paper) • Envelopes*1 • T-Shirt Transfers*1 • Greeting Card*1 • Card Stock*1 *1 Printing to this paper from a PictBridge (Wi-Fi) compliant device is not supported. *2 When printing, mount a special adapter on the supplied multi-purpose tray.
Page 203 ◦ Minimum size: 5.83 x 8.27 in. (148.0 x 210.0 mm) Maximum size: 8.50 x 11.69 in. (215.9 x 297.0 mm) Paper Weight You can use paper in the following weight range. • 17 to 28 lb (64 to 105 g /m ) (plain paper other than genuine Canon paper)
Page 204: Paper Load Limit
Note • Page sizes and media types differ depending on the country or region where the paper is sold. For details on page sizes and media types, access the Canon website. Paper Load Limits of Rear Tray and Cassette Genuine Canon Paper Paper for printing documents: Media Name <Model No.>...
Page 205 Paper other than Genuine Canon Paper Common Name Rear Tray Cassette Plain Paper (including recycled paper)*1 Approx. 100 sheets (Legal: Approx. 250 sheets 10 sheets) Envelopes 10 envelopes T-Shirt Transfers A4: 1 sheet Greeting Card Letter, 7"x10"(18x25cm): 1 sheet Card Stock...
Page 206: Unsupported Media Types
• Paper that is too thin (weighing less than 17 lb (64 g /m • Paper that is too thick (plain paper weighing more than 28 lb (105 g /m ), except for Canon genuine paper) • Paper thinner than a postcard, including plain paper or notepad paper cut to a small size (when printing on paper smaller than A5) •...
Page 207: Handling Paper
Handling Paper • Be careful not to rub or scratch the surfaces of any types of paper when handling. • Hold the paper as closely as possible to its edges and try not to touch the printing surface. The print quality may be degraded if the printing surface is smudged with sweat or oil that comes from your hands.
Page 208: Printing
Printing Printing from Computer Printing from Smartphone/Tablet Printing from Digital Camera Paper Settings...
Page 209: Printing From Computer
Printing from Computer Printing from Application Software (Windows Printer Driver) Printing from Application Software (macOS AirPrint) Printing Using Canon Application Software Printing Using a Web Service...
Page 210: Printing From Application Software (Macos Airprint)
Printing from Application Software (macOS AirPrint) Printing Basic Execute Borderless Printing Printing on Postcards Adding Printer How to Open Printer Settings Screen Displaying the Printing Status Screen Deleting the Undesired Print Job Removing Printer That Is No Longer Required from List of Printers...
Page 211: Printing
Printing This printer is compatible with the macOS standard printing system (AirPrint). You can start printing right away after connecting this printer to your Mac without installing any special software. Checking Your Environment First, check your environment. • AirPrint Operation Environment Mac running the latest version of OS •...
Page 212 Note • Click Show Details to switch the setup window to the detailed display. 6. Check print settings Set items such as Paper Size to the appropriate size, as well as Feed From and Media Type from Media & Quality of the pop-up menu. Select Auto Select for Media Type.
Page 213 • If printing in A4, A5, JIS B5, or US Letter, set the desired feed position (Main Tray or Rear Tray) from Feed From of the print dialog. If Auto Select is selected in Feed From, the feed position differs depending on Media Type. If Media Type is set to plain paper, it is fed from the cassette (main tray).
Page 214: Execute Borderless Printing
Execute Borderless Printing The borderless printing function allows you to print data without any margin by enlarging the data so that it extends slightly off the paper. In standard printing, margins are created around the document area. However, in borderless printing function, these margins are not created. When you want to print data such as a photo without providing any margin around it, set borderless printing.
Page 215 Important • Borderless printing only supports specific paper sizes. Make sure to select a paper size with the wording "Borderless" from the Paper Size. • Print quality may deteriorate or the sheet may be stained at the top and bottom depending on the type of paper used.
Page 216: Printing On Postcards
Printing on Postcards This section describes the procedure for printing on postcards. Load postcards in printer 2. Select paper size and paper type from the printer Register Hagaki for paper size from the printer operation panel. Also, register Hagaki, IJ Hagaki, or Hagaki K for paper type, according to your purpose. When you print on the address side, register Hagaki.
Page 217 Important • Two-sided printing is not possible for postcards, so remove the Two-Sided check mark. If you print with the Two-Sided check mark on, the printing result may not be as you intended. • You will get cleaner printing if you print the message side first and then print the address side. 5.
Page 218: Adding Printer
Adding Printer Procedure for adding printer to your Mac is explained. To re-add a printer that was deleted, open System Preferences -> Printers & Scanners, click + next to the printer list, and then perform the procedure described below. If your printer is connected via USB, and you connect the USB cable to a Mac, the printer is automatically added.
Page 219: How To Open Printer Settings Screen
How to Open Printer Settings Screen The settings screen of the printer can be displayed from your application software. Opening the Page Setup Dialog Use this procedure to set the page (paper) settings before printing. 1. Select Page Setup... from the File menu of the application software The Page Setup dialog opens.
Page 220: Displaying The Printing Status Screen
Displaying the Printing Status Screen Check the print progress according to the following procedure: 1. Launch the printing status screen • If the print data has been sent to the printer The printing status screen opens automatically. To display the printing status screen, click the (the printer icon) displayed on the Dock.
Page 221: Deleting The Undesired Print Job
Deleting the Undesired Print Job If the printer does not start printing, canceled or failed print job data may be remaining. Delete unnecessary print jobs from the print status check screen. 1. Open System Preferences, and select Printers & Scanners 2.
Page 222: Removing Printer That Is No Longer Required From List Of Printers
Removing Printer That Is No Longer Required from List of Printers The printer that is no longer in use can be removed from the list of printers. Before removing the printer, remove the cable connecting the printer and PC. You cannot remove the printer if not logged in as the administrator. For information about an administrative user, see Users &...
Page 223: Printing Using Canon Application Software
Printing Using Canon Application Software Easy-PhotoPrint Editor Guide...
Page 224: Printing From Smartphone/Tablet
Printing from Smartphone/Tablet Printing from iPhone/iPad/iPod touch (iOS) Printing from Smartphone/Tablet (Android) Printing from Windows 10 Mobile Device Printing with Wireless Direct...
Page 225: Printing With Wireless Direct
Printing with Wireless Direct You can connect devices (e.g. computer, smartphone, or tablet) to the printer by two methods below. • Wireless connection (connecting devices via a wireless router) • Direct wireless connection (connecting devices using Wireless Direct) This section describes Wireless Direct, which allows you to print by connecting the devices to the printer directly.
Page 226 The Wireless Direct is enabled and a device can be connected to the printer wirelessly. Note • You can check the following on the Wireless router info screen. Use the button to select an item you want to check and then press the OK button. •...
Page 227 • For more on printing from a device via Wi-Fi, refer to the device's or application's instruction manual. • You can print from your smartphone or tablet by installing Canon PRINT Inkjet/SELPHY. Download it from App Store and Google Play.
Page 228 Change password • Manual setup 1. Select Manual setup and then press the OK button. 2. Press OK button and enter new password. 3. Select Yes and press OK button. • Auto update 1. Select Auto update and then press the OK button. 2.
Page 229: Paper Settings
Paper Settings By registering the paper size and the media type loaded on the rear tray or in the cassette, you can prevent the printer from misprinting by displaying the message before printing starts when the paper size or the media type of the loaded paper differs from the print settings.
Page 230 • When you insert the cassette: The screen to register the cassette paper information is displayed. Register the page size according to the paper loaded in the cassette. * You can load only plain paper in the cassette. Important • For more on the proper combination of paper settings you can specify by the printer driver for Windows and on the LCD: Paper Settings on the Printer Driver and the Printer (Media Type) Paper Settings on the Printer Driver and the Printer (Paper Size)
Page 231 When you start printing, Size or type of loaded paper is different from the settings appears on the LCD. When you press the OK button, the screen for selecting the processing method is displayed. Please choose one of the following. Note •...
Page 232 To change the setting: Feed settings • When you print from Windows: The message which prevents misprinting is disabled by default. To change the setting: Changing the Printer Operation Mode • When you print from macOS: The message which prevents misprinting is enabled by default. To change the setting: Changing the Printer Operation Mode Important...
Page 233: Frequently Asked Questions
Frequently Asked Questions Cannot Find Printer on Network Cannot Find Printer while Using Wi-Fi Network Key (Password) Unknown Network Cannot Print or Connect For other questions about network, click here. Printer Does Not Print Printouts Are Blank/Blurry or Fuzzy/Inaccurate or Bleeding Colors/Streaks or Lines Printout Results Are Unsatisfactory Print List of Support Code for Error (Paper Jams)
Page 234 Cannot Print from Smartphone/Tablet Cannot Set Correctly (Network) Cannot Find Printer on Check Printer Settings Screen During Setup (Windows) Cannot Find Printer while Using Wi-Fi Cannot Find Printer while Using Wired LAN Printer Suddenly Stopped Working for Some Reason Network Key (Password) Unknown Forgot Administrator Password of Printer Printer Cannot Be Used After Replacing Wireless Router or Changed Router Settings Message Appears on Computer During Setup...
Page 235: Network Settings And Common Problems
Network Settings and Common Problems Here are frequently asked questions on network. Select a connection method you are using, or you want to use. Wireless LAN Wireless Direct Wired LAN Wireless LAN Cannot Find Printer Cannot Find Printer while Using Wi-Fi Cannot Find Printer on Check Printer Settings Screen During Setup (Windows) Cannot Proceed beyond Printer Connection Screen Printer Is Not Found by Printer Find Screen of Setup...
Page 236 Checking Wireless Router Network Name (SSID) for Smartphone/Tablet Setting Up Using Smartphone/Tablet Cannot Print from Smartphone/Tablet Cannot Find Printer from Smartphone/Tablet while Using Bluetooth Downloading Canon PRINT Inkjet/SELPHY Problems while Using Printer Message Appears on Computer During Setup Printer Prints Slowly...
Page 237 Detect Same Printer Name Cannot Print or Connect Printer Suddenly Stopped Working for Some Reason Cannot Print or Connect LAN Setting Tips/Changing LAN Settings Forgot Administrator Password of Printer Checking Network Information Restoring to Factory Defaults Default Network Settings Connects to Another Computer via LAN/Changes from USB to LAN Connection Printing Network Settings Reconfiguration Method of LAN Connection/Reconfiguration Method of Wi-Fi Connection Checking Status Code...
Page 238: Network Communication Problems
Network Communication Problems Cannot Find Printer on Network Network Connection Problems Other Network Problems...
Page 239: Cannot Find Printer On Network
Cannot Find Printer on Network While performing printer setup: Cannot Find Printer on Check Printer Settings Screen During Setup (Windows) Cannot Proceed beyond Printer Connection Screen While using printer: Cannot Find Printer while Using Wi-Fi Note • You cannot use the wireless LAN and the wired LAN at the same time.
Page 240: Cannot Find Printer On Check Printer Settings Screen During Setup (Windows)
Cannot Find Printer on Check Printer Settings Screen During Setup (Windows) If the printer cannot be found and the Check Printer Settings screen appears after searching the printer by Automatic search on the Search for Printers screen during driver setup, click Redetect and search for the printer again by the IP address on the Search for Printers screen.
Page 241 Cannot Find Printer on Check Printer Settings Screen During Wired LAN Setup (Windows)- Checking Security Software Settings Cannot Find Printer on Check Printer Settings Screen During Wired LAN Setup (Windows)- Checking Router Settings...
Page 242: Power Status
Cannot Find Printer on Check Printer Settings Screen During Wi-Fi Setup (Windows)-Checking Power Status Are printer and network device (router, etc.) turned on? Make sure the printer is turned on. Checking that Power Is On Make sure network device (router, etc.) is turned on. If printer or network device is off: Turn on printer or network device.
Page 243: Pc Network Connection
Cannot Find Printer on Check Printer Settings Screen During Wi-Fi Setup (Windows)-Checking PC Network Connection Can you view any web pages on your computer? Make sure the computer and network device (router, etc.) are configured and the computer is connected to the network.
Page 244 Cannot Find Printer on Check Printer Settings Screen During Wi-Fi Setup (Windows)-Checking Printer's Wi-Fi Settings Is printer set to allow wireless communication? Make sure the icon is displayed on the LCD. If icon is not displayed: The printer is not set to allow wireless communication. Turn on wireless communication on the printer. If icon is displayed: Cannot Find Printer on Check Printer Settings Screen During Wi-Fi Setup (Windows)-Checking Wi-Fi Environment...
Page 245: Wi-Fi Environment
Cannot Find Printer on Check Printer Settings Screen During Wi-Fi Setup (Windows)-Checking Wi-Fi Environment Is the printer connected to the wireless router? Use the icon on the LCD to make sure the printer is connected to the wireless router. is displayed: •...
Page 246 For details, see the instruction manual supplied with the wireless router or contact the manufacturer. After taking measures above, click Redetect on the Check Printer Settings screen to redetect the printer. If the printer is found, follow the instructions on the screen to continue to set up network communication. If the printer cannot be detected, the printer is not connected to the wireless router.
Page 247 Cannot Find Printer on Check Printer Settings Screen During Wi-Fi Setup (Windows)-Checking Printer's IP Address Is printer's IP address specified correctly? If printer's IP address is not specified correctly, the printer may not be found. Make sure whether printer's IP address is not used for another device. To check the printer's IP address, print out the network settings information.
Page 248: Security Software Settings
• If no message appears: Cancel the setup, and then set the security software to allow Canon software to access the network. The file SETUP.exe or SETUP64.exe in the win > Driver > DrvSetup folder on the Setup CD- After setting the security software, redo the network communication setup from the beginning.
Page 249: Wireless Router Settings
Cannot Find Printer on Check Printer Settings Screen During Wi-Fi Setup (Windows)-Checking Wireless Router Settings Check wireless router settings. Check wireless router network connection settings, such as IP address filtering, MAC address filtering, encryption key, and DHCP function. Make sure the same radio channel is assigned to the printer and the wireless router. To check the settings of the wireless router, see the instruction manual supplied with the wireless router or contact the manufacturer.
Page 250: Checking Lan Cable And Router
Cannot Find Printer on Check Printer Settings Screen During Wired LAN Setup (Windows)-Checking LAN Cable and Router Is LAN cable connected, and are printer and router on? Make sure the LAN cable is connected. Make sure the printer is turned on. Checking that Power Is On Make sure the router is turned on.
Page 251: Checking Pc Network Connection
Cannot Find Printer on Check Printer Settings Screen During Wired LAN Setup (Windows)-Checking PC Network Connection Can you view any web pages on your computer? Make sure the computer and network device (router, etc.) are configured and the computer is connected to the network.
Page 252: Cannot Find Printer On Check Printer Settings Screen During Wired Lan Setup (Windows)-Checking Printer's Wired Lan Settings
Cannot Find Printer on Check Printer Settings Screen During Wired LAN Setup (Windows)-Checking Printer's Wired LAN Settings Is printer set to allow wired communication? Make sure the icon is displayed on the LCD. If icon is not displayed: The printer is not set to allow wired communication. Turn on wired communication on the printer. Once you have turned on wired communication, redo the network communication setup from the beginning.
Page 253: Checking Printer's Ip Address
Cannot Find Printer on Check Printer Settings Screen During Wired LAN Setup (Windows)-Checking Printer's IP Address Is printer's IP address specified correctly? If printer's IP address is not specified correctly, the printer may not be found. Make sure whether printer's IP address is not used for another device.
Page 254: Cannot Find Printer On Check Printer Settings Screen During Wired Lan Setup (Windows)-Checking Security Software Settings
• If no message appears: Cancel the setup, and then set the security software to allow Canon software below to access the network. The file SETUP.exe or SETUP64.exe in the win > Driver > DrvSetup folder on the Setup CD- After setting the security software, redo the network communication setup from the beginning.
Page 255: Checking Router Settings
Cannot Find Printer on Check Printer Settings Screen During Wired LAN Setup (Windows)-Checking Router Settings Check router settings. Check router network connection settings such as IP address filtering, MAC address filtering, and DHCP function. For more on checking the settings of the router, refer to the instruction manual supplied with the router or contact its manufacturer.
Page 256: Cannot Proceed Beyond Printer Connection Screen
Cannot Proceed beyond Printer Connection Screen If you cannot proceed beyond the Printer Connection screen, check the following. Make sure USB cable is securely plugged in to printer and computer. Check1 Connect the printer and the computer using a USB cable as the illustration below. The USB port is located at the back of the printer.
Page 257 3. Click Exit on Start Setup screen and finish setup. 4. Turn off printer. 5. Restart computer. 6. Make sure you have no application software running. 7. Perform setup on top page of Online Manual. Note • You can use the Setup CD-ROM to redo setup. •...
Page 258: Cannot Find Printer While Using Wi-Fi
Cannot Find Printer while Using Wi-Fi Make sure printer is turned on. Check1 If not, make sure the printer is securely plugged in and press ON button to turn on. The ON lamp flashes while the printer is initializing. Wait until the ON lamp stops flashing and remains lit. Check the icon on LCD.
Page 259 Note • Use 2.4 GHz frequency band to connect to a wireless router. Match the network name (SSID) set for the printer with that for 2.4 GHz frequency band of the wireless router. To check the network name (SSID) set for the printer, print out the network setting information. Printing Network Settings Note •...
Page 260 Make sure security software's firewall is off. Check9 If your security software's firewall is on, a message may appear warning you that Canon software is attempting to access the network. If this warning message appears, set security software to always allow access.
Page 261: Network Connection Problems
Network Connection Problems Printer Suddenly Stopped Working for Some Reason Network Key (Password) Unknown Printer Cannot Be Used After Replacing Wireless Router or Changed Router Settings...
Page 262: Printer Suddenly Stopped Working For Some Reason
Printer Suddenly Stopped Working for Some Reason Cannot Connect to a Printer after Network Configuration Changes Cannot Connect to a Printer via Wireless LAN (Wi-Fi) Cannot Connect to a Printer through Wireless Direct Cannot Connect to a Printer via Wired LAN Cannot Print through Network Cannot Connect to a Printer after Network Configuration Changes It may take a while for the computer to obtain an IP address, or you may need to restart your computer.
Page 263 Note • Use 2.4 GHz frequency band to connect to a wireless router. Match the network name (SSID) set for the printer with that for 2.4 GHz frequency band of the wireless router. To check the current network settings of the printer, print out the network setting information. Printing Network Settings Note •...
Page 264 Make sure security software's firewall is off. Check9 If your security software's firewall is on, a message may appear warning you that Canon software is attempting to access the network. If this warning message appears, set security software to always allow access.
Page 265 Select Device settings > LAN settings > Wireless Direct > Switch WL Direct in this order and select Yes. Check the settings of your device (smartphone/tablet). Check3 Make sure Wi-Fi is enabled on your device. For details, refer to your device's instruction manual. Make sure printer is selected as connection for device (e.g.
Page 266 If printer driver is not installed, install it. (Windows) Check2 Install the printer driver using the Setup CD-ROM or install it from the Canon website. When using Wi-Fi, make sure wireless router does not restrict which Check3 computers can access it.
Page 267: Network Key (Password) Unknown
Network Key (Password) Unknown WPA/WPA2 or WEP Key Set for Wireless Router Unknown, Cannot Connect Setting an Encryption Key WPA/WPA2 or WEP Key Set for Wireless Router Unknown, Cannot Connect For more on setting up a wireless router, see the instruction manual provided with the wireless router or contact its manufacturer.
Page 268 • For macOS: Starting Up IJ Network Device Setup Utility Selecting WPA, WPA2, or WPA/WPA2 is recommended for security reason. If your wireless router is compatible with WPA/WPA2, you can also use WPA2 or WPA. • Using WPA/WPA2 (Windows) The authentication method, Wi-Fi password, and dynamic encryption type must be identical among the wireless router, the printer, and your computer.
Page 269: Printer Cannot Be Used After Replacing Wireless Router Or Changed Router Settings
Printer Cannot Be Used After Replacing Wireless Router or Changed Router Settings When you replace a wireless router, redo the network setup for the printer according to the replaced one. Perform setup from the web page. For Windows, you can perform setup using the Setup CD-ROM. Note •...
Page 270 If using WPA/WPA2 key or a password, make sure encryption key for Check3 computer, network device, and printer matches key set for wireless router. The length or format of the Wi-Fi password and authentication method must be identical among the wireless router, the printer, and your computer.
Page 271: Other Network Problems
Other Network Problems Checking Network Information Restoring to Factory Defaults...
Page 272: Checking Network Information
Printing Network Settings For Windows, you can check the network setting information on the computer screen. Canon IJ Network Device Setup Utility Screen Checking Computer IP Address or MAC Address To check the IP Address or MAC address of your computer, follow the instructions below.
Page 273 3. Click TCP/IP to check the IP address, or click Hardware to check the MAC address. Checking Communication Between the Computer, the Printer, and the Wireless Router Perform a ping test to check if communication is taking place. • For Windows: 1.
Page 274 64 bytes from XXX.XXX.XXX.XXX: icmp_seq=0 ttl=64 time=3.394 ms 64 bytes from XXX.XXX.XXX.XXX: icmp_seq=1 ttl=64 time=1.786 ms 64 bytes from XXX.XXX.XXX.XXX: icmp_seq=2 ttl=64 time=1.739 ms --- XXX.XXX.XXX.XXX ping statistics --- 3 packets transmitted, 3 packets received, 0% packet loss If packet loss is 100%, communication is not taking place. Otherwise, computer is communicating with target device.
Page 275: Restoring To Factory Defaults
Restoring to Factory Defaults Important • Initialization erases all network settings on the printer, making printing operation from a computer over a network impossible. To use the printer over a network again after restoring it to the factory defaults, redo setup from the web page. For Windows, you can perform setup using the Setup CD-ROM.
Page 276: Problems While Printing From Smartphone/Tablet
Problems while Printing from Smartphone/Tablet Cannot Print from Smartphone/Tablet...
Page 277: Cannot Print From Smartphone/Tablet
Cannot Print from Smartphone/Tablet If you cannot print from your smartphone/tablet, it is possible that your smartphone/tablet cannot communicate with the printer. Check the cause of your problem according to the connection method. Cannot Communicate with Printer over Wireless LAN Cannot Communicate with Printer while It Is in Wireless Direct Note •...
Page 278 To check the current network settings of the printer, print out the network setting information. Printing Network Settings Note • IJ Network Device Setup Utility allows you to diagnose and repair the network status. Select the link below to download IJ Network Device Setup Utility and install it. Checking Printer Connection Status Using IJ Network Device Setup Utility See below for starting up IJ Network Device Setup Utility.
Page 279 Select the link below to download IJ Network Device Setup Utility and install it. Checking Printer Connection Status Using IJ Network Device Setup Utility See below for starting up IJ Network Device Setup Utility. • For Windows: Starting Up IJ Network Device Setup Utility •...
Page 280 Have you entered the proper password specified for the Wireless Direct? Check5 To check the password specified for the printer, display it using the operation panel of the printer or print out the network setting information of the printer. • Display on the LCD. LAN settings •...
Page 281: Printing Problems
Printing Problems Printer Does Not Print Ink Does Not Come Out Paper Does Not Feed Properly/"No Paper" Error Cannot Print on the Disc Label Printout Results Are Unsatisfactory...
Page 282: Printer Does Not Print
Printer Does Not Print Make sure printer is turned on. Check1 If not, make sure the printer is securely plugged in and press ON button to turn on. The ON lamp flashes while the printer is initializing. Wait until the ON lamp stops flashing and remains lit. Note •...
Page 283 The printer will not print properly if you are using a printer driver for a different printer. • For Windows: Make sure "Canon XXX series" (where "XXX" is your printer's name) is selected in the Print dialog box. Note • If multiple printers are registered to your computer, select Set as Default Printer for a printer to make the one selected by default.
Page 284 Note • If multiple printers are registered to your computer, select Set as Default Printer from System Preferences > Printers & Scanners for a printer to make the one selected by default. Are you trying to print a large data file? (Windows) Check7 If you are trying to print a large file, it takes a long time to start printing.
Page 285: Ink Does Not Come Out
24 hours later. • If problem is not resolved after performing print head deep cleaning twice: If print head deep cleaning does not resolve the problem, the print head may be damaged. Contact your nearest Canon service center to request a repair.
Page 286: Paper Does Not Feed Properly/"No Paper" Error
Paper Does Not Feed Properly/"No Paper" Error Make sure paper is loaded. Check1 Loading Paper When loading paper, consider the following. Check2 • When loading two or more sheets of paper, align the edges of the sheets before loading the paper. •...
Page 287 If the paper tears in the rear tray, see List of Support Code for Error (Paper Jams) to remove it. If there are any foreign objects in the rear tray, be sure to turn off the printer, unplug it from the power supply, then remove the foreign object.
Page 288 Are transport unit cover and rear cover attached properly? Check9 Rear View for the positions of the transport unit cover and the rear cover. If the measures above do not solve the problem, contact your nearest Canon service center to request a repair.
Page 289: Cannot Print On The Disc Label
Use the multi-purpose tray supplied with this printer. For more on placing the multi-purpose tray, see Placing a Printable Disc. Unrecognizable printable disc may be placed. Check2 Canon recommends that you use printable discs specially processed to be printed on by an inkjet printer.
Page 290 Multi-Purpose Tray Jammed Pull out the multi-purpose tray gently. If the multi-purpose tray cannot be pulled out, cycle the power switch. The multi-purpose tray will automatically be ejected. When the multi-purpose tray is pulled out, place the multi-purpose tray again and retry printing. For more on placing the multi-purpose tray, see Placing a Printable Disc.
Page 291: Printout Results Are Unsatisfactory
Check the settings on your PictBridge (Wi-Fi) compliant device or using the operation panel. PictBridge (Wi-Fi) Print Settings PictBridge settings • Printing from your smartphone/tablet using Canon PRINT Inkjet/SELPHY Check the settings on Canon PRINT Inkjet/SELPHY. Print Photos Quickly from Smartphone Make sure appropriate print quality is selected (see list above).
Page 292 See also the sections below: Printouts Are Blank/Blurry or Fuzzy/Inaccurate or Bleeding Colors/Streaks or Lines Lines Are Misaligned/Distorted Paper Is Smudged / Printed Surface Is Scratched Vertical Line Next to Image Cannot Complete Printing Part of Page Is Not Printed (Windows) Lines Incomplete or Missing (Windows) Images Incomplete or Missing (Windows) Ink Blots / Paper Curl...
Page 293: Printouts Are Blank/Blurry Or Fuzzy/Inaccurate Or Bleeding Colors/Streaks Or Lines
Printouts Are Blank/Blurry or Fuzzy/Inaccurate or Bleeding Colors/ Streaks or Lines Printing Is Blurry Colors Are Wrong...
Page 294 White Streaks Appear Check paper and print quality settings. Check1 Printout Results Are Unsatisfactory Check status of ink tanks. Replace ink tank if ink has run out. Check2 Replacing Ink Tanks Are the orange tape and plastic wrap still on the ink tank? Check3 Make sure all the protective plastic wrap is peeled off to expose the Y-vent area, as shown below (A).
Page 295 • If problem is not resolved after performing print head deep cleaning twice: If print head deep cleaning does not resolve the problem, the print head may be damaged. Contact your nearest Canon service center to request a repair. When using paper with one printable surface, check the correct printable side Check5 of the paper.
Page 296: Lines Are Misaligned/Distorted
Lines Are Misaligned/Distorted Check paper and print quality settings. Check1 Printout Results Are Unsatisfactory Perform print head alignment. Check2 If printed lines are misaligned/distorted or print results are otherwise unsatisfactory, adjust the print head position. Aligning the Print Head Note •...
Page 297: Paper Is Smudged / Printed Surface Is Scratched
Paper Is Smudged / Printed Surface Is Scratched Paper Is Smudged Smudged Edges Smudged Surface Printed Surface Is Scratched Check paper and print quality settings. Check1 Printout Results Are Unsatisfactory Check paper type. Check2 Make sure you are using the right paper for what you are printing. Supported Media Types Correct curl before loading paper.
Page 298 1. Roll up paper in opposite direction to paper curl as shown below. 2. Check that paper is now flat. We recommend printing curl-corrected paper one sheet at a time. Note • Depending on paper type, the paper may smudge or may not feed properly even if it is not curled inward. Follow the instructions below to curl the paper outward up to 0.1 in.
Page 299 2. Open Canon IJ Printer Assistant Tool. Opening the Maintenance Tool (Canon IJ Printer Assistant Tool) 3. Select Custom Settings. 4. Select Prevents paper abrasion check box and select OK. 5. Check message and select OK. • From computer (macOS): Adjust the setting to prevent paper abrasion from Remote UI.
Page 300 3. Select Custom Settings. 4. Drag Ink Drying Wait Time slide bar to set the wait time and select OK. 5. Check message and select OK. • For macOS: Set the waiting time using Remote UI. Opening Remote UI for Maintenance...
Page 301: Vertical Line Next To Image
Vertical Line Next to Image Is loaded paper size correct? Check If the loaded paper is larger than the size you specified, a vertical line may appear in the margin. Set the paper size to match the loaded paper. Printout Results Are Unsatisfactory Note •...
Page 302: Mechanical Problems
Mechanical Problems Printer Does Not Turn On Printer Turns Off Unexpectedly or Repeatedly USB Connection Problems Cannot Communicate with Printer via USB Wrong Language Appears in LCD...
Page 303: Printer Does Not Turn On
Make sure power plug is securely connected to printer, and then turn on again. Check2 Unplug printer, leave it for at least 2 minutes, and then plug it back in and turn Check3 on again. If this does not solve the problem, contact your nearest Canon service center to request a repair.
Page 304: Printer Turns Off Unexpectedly Or Repeatedly
• To disable the setting from the computer: For Windows, use Canon IJ Printer Assistant Tool to disable the setting. Follow the procedure below to disable the setting using Canon IJ Printer Assistant Tool. 1. Open Canon IJ Printer Assistant Tool.
Page 305: Usb Connection Problems
USB Connection Problems Make sure of the checking item below when you find one of the followings. • Printing is slow. • Hi-Speed USB connection does not work. • A message such as "This device can perform faster" appears. (Windows) Note •...
Page 306: Cannot Communicate With Printer Via Usb
Cannot Communicate with Printer via USB Make sure printer is turned on. Check1 Connect USB cable properly. Check2 As the illustration below, the USB port is at the back of the printer. Important • Connect the "Type-B" terminal to the printer with the notched side facing UP. For details, refer to the instruction manual supplied with the USB cable.
Page 307: Wrong Language Appears In Lcd
Wrong Language Appears in LCD Follow the instructions below to select your language. 1. Press Setup button and wait a little. 2. Press button once and press OK button. 3. Press button 5 times and press OK button. 4. Use button to select language for LCD and press OK button.
Page 308: Installation And Download Problems
Installation and Download Problems Failed to Printer Driver Installation (Windows) Updating Printer Driver in Network Environment (Windows)
Page 309: Failed To Printer Driver Installation (Windows)
CD-ROM icon in the window that appears. If the contents of the CD-ROM appear, double-click Msetup4.exe. If you cannot install the printer driver with the Setup CD-ROM, install it from the Canon website. Note • If the CD-ROM icon does not appear, try the following: •...
Page 310 Deleting the Unnecessary Printer Driver Reinstall the printer driver with the Setup CD-ROM or install it from the Canon website. Note • If the installer was stopped due to a Windows error, Windows operation may be unstable, and you...
Page 311: Updating Printer Driver In Network Environment (Windows)
Updating Printer Driver in Network Environment (Windows) Download the latest printer driver. Download the latest printer driver for your model on the download page of the Canon website. Uninstall the existing printer driver and follow the installation instructions to install the latest printer driver that you downloaded.
Page 312: Errors And Messages
Errors and Messages Four-Digit Alphanumeric Characters Appear on LCD When Error Occurred Message (Support Code) Appears...
Page 313: Four-Digit Alphanumeric Characters Appear On Lcd
Four-Digit Alphanumeric Characters Appear on LCD A message appears on the LCD or your computer screen. Depending on an error or message, four-digit alphanumeric characters appear. The characters represent a "support code" (error number). For details on each support code, see List of Support Code for Error.
Page 314: When Error Occurred
When Error Occurred If an error occurs in printing, for example if the paper runs out or jams, a troubleshooting message appears automatically. Take the appropriate action described in the message. When an error occurs, a message appears on the computer, or an error code appears on the printer. For some errors, a support code (error number) appears on the computer screen.
Page 315: Message (Support Code) Appears
Message (Support Code) Appears This section describes some of the errors and messages that may appear. Note • A support code (error number) is displayed on the computer for some errors. For details on errors that have support code, see List of Support Code for Error.
Page 316 Check3 Uninstall the printer driver following the procedure described in Deleting the Unnecessary Printer Driver and reinstall it from the Setup CD-ROM or the Canon website. When printer is connected to your computer with a USB cable, check device Check4 status from your computer.
Page 317 • "Printer driver could not be found" Uninstall the printer driver following the procedure described in Deleting the Unnecessary Printer Driver and reinstall it from the Setup CD-ROM or the Canon website. • "Could not print Application name - File name"...
Page 318: List Of Support Code For Error
List of Support Code for Error Support code appears on the LCD and your computer screen when errors occur. A "support code" is an error number, and appears along with an error message. When an error occurs, check the support code displayed on the LCD and computer screen and take the appropriate action in response.
Page 319 6801 6830 6831 6832 6833 6900 6901 6902 6910 6911 6920 6921 6930 6931 6932 6933 6940 6941 6942 6943 6944 6945 6946 6951 6A80 6A81 6D01 • 7000 to 7ZZZ 7500 7600 7700 7800 • 8000 to 8ZZZ 8300 •...
Page 320: List Of Support Code For Error (Paper Jams)
List of Support Code for Error (Paper Jams) If paper jams, remove it following the appropriate procedure as shown below. • If you can see the jammed paper at the paper output slot or the rear tray: 1300 • If you cannot see the jammed paper at the paper output slot or the rear tray: ◦...
Page 321 1300 Cause Paper is jammed when feeding paper from rear tray. What to Do If the paper fed from the rear tray is jammed, remove the jammed paper from the paper output slot or from the rear tray following the instructions below. 1.
Page 322 • We recommend using paper sizes other than A5 to print documents with photos or graphics. A5 paper may curl and jam as it leaves the printer. If the measures above do not solve the problem, contact your nearest Canon service center to request a repair.
Page 323 1303 Cause Paper is jammed when feeding paper from cassette. What to Do 1. Remove jammed paper. • If the paper is jammed at the paper output slot: 1300 • If the paper is jammed inside the printer: Paper Is Jammed inside Printer •...
Page 324 1304 Cause Paper is jammed when performing automatic duplex printing. What to Do 1. Remove jammed paper. • If the paper is jammed at the paper output slot: 1300 • If the paper is jammed inside the printer: Paper Is Jammed inside Printer •...
Page 325 1313 Cause Paper is jammed as printer pulled in printed paper. What to Do If the paper is jammed as the printer pulled in the printed paper, try to remove the paper from the following locations. • Paper output slot 1300 •...
Page 326: Paper Is Jammed Inside Printer
Paper Is Jammed inside Printer If the jammed paper tears and you cannot remove the paper from the paper output slot, or if the jammed paper remains inside the printer, remove the paper following the instructions below. Note • If paper becomes jammed during printing and you need to turn off the printer to remove it, press the Stop button to stop the printing before you turn off the printer.
Page 327 4. Hold jammed paper firmly in both hands. If the paper is rolled up, pull out it. 5. Slowly pull out paper, so as not to tear it. Pull out the paper at an angle of about 45 degrees.
Page 328 Check the printer again for any remaining bits of paper. If the measures above do not solve the problem, contact your nearest Canon service center to request a repair.
Page 329: Removing Jammed Paper From Rear Side
Removing Jammed Paper from Rear Side Note • If paper becomes jammed during printing and you need to turn off the printer to remove it, press the Stop button to stop the printing before you turn off the printer. 1. Make sure you have unplugged the power cord. 2.
Page 330 4. Slowly pull out paper. Note • Do not touch the inner parts of the printer. If you were not able to remove the paper in this step, detach the transport unit cover and remove the paper by following these steps. 1.
Page 331 The print data that was sent to the printer is erased. Redo the printing. Note • When reloading the paper, make sure you are using suitable paper and loading it correctly. If the measures above do not solve the problem, contact your nearest Canon service center to request a repair.
Page 332 1000 Cause Possible causes include the following. • There is no paper in the rear tray. • Paper is not loaded in the rear tray properly. What to Do Take the corresponding actions below. • Load paper in the rear tray. Loading Paper in the Rear Tray •...
Page 333 1003 Cause Possible causes include the following. • There is no paper in the cassette. • Paper is not loaded in the cassette properly. What to Do Take the corresponding actions below. • Load paper in the cassette. Loading Paper in the Cassette •...
Page 334 1013 Cause Multi-purpose tray compatible media is not set on multi-purpose tray, or the media position is misaligned. What to Do Set the multi-purpose tray compatible media properly by following these steps. 1. Remove multi-purpose tray. 2. Place multi-purpose tray compatible media on multi-purpose tray properly. Placing Multi-purpose Tray 2.
Page 335 1200 Cause Top cover is open. What to Do Close the top cover and wait for a while. Do not close it while you are replacing an ink tank.
Page 336 1401 Cause Print head may be damaged. What to Do Turn off the printer and turn it back on. If this does not solve the problem, contact your nearest Canon service center to request a repair.
Page 337 1600 Cause Ink may have run out. What to Do Replacing the ink tank is recommended. If printing is in progress and you want to continue printing, press the printer's OK button with the ink tank installed. Then printing can continue. Replacing the ink tank is recommended after the printing. The printer may be damaged if printing is continued under the ink out condition.
Page 338 1660 Cause The ink tank cannot be recognized. What to Do Printing cannot be performed because the ink tank is not installed or is not compatible with this printer. Check the ink tank. If you want to cancel printing, press the printer's Stop button.
Page 339 With this operation, disabling the function for detecting the remaining ink level is memorized. Please be advised that Canon shall not be liable for any malfunction or trouble which may be caused by continuation of printing under the ink out condition.
Page 340 With this operation, disabling the function for detecting the remaining ink level is memorized. Please be advised that Canon shall not be liable for any malfunction or trouble caused by continuation of printing under the ink out condition or by using refilled ink tanks.
Page 341 Cause Ink absorber is almost full. What to Do Press the printer's OK button to continue printing. Contact your nearest Canon service center to request a repair. Note • In the case of warnings or errors caused by remaining ink levels, the printer cannot print.
Page 342 Open the top cover and make sure the tape for securing the print head holder during transportation has been removed. If the tape is still there, remove it and close the top cover. If this does not solve the problem, contact your nearest Canon service center to request a repair.
Page 343 2110 Cause Paper settings for printing do not match cassette paper information set on printer. Note • See below for the correct correspondence between paper settings made on the printer driver or on the LCD. Paper Settings on the Printer Driver and the Printer (Media Type) (Windows) Paper Settings on the Printer Driver and the Printer (Paper Size) (Windows) •...
Page 344 For example, if the print paper setting is A5, and cassette paper information is set to A4, change the paper in the cassette to A5 paper and proceed with printing. Once you have inserted the cassette after changing the paper, the screen for setting cassette paper information appears.
Page 345 2113 Cause Paper settings for printing do not match either rear tray or cassette paper information set on printer. Note • See below for the correct correspondence between paper settings made on the printer driver or on the LCD. Paper Settings on the Printer Driver and the Printer (Media Type) (Windows) Paper Settings on the Printer Driver and the Printer (Paper Size) (Windows) •...
Page 346 For example, if the print paper setting is A5, and rear tray and cassette paper information are set to A4, change the paper in the rear tray or the cassette to A5 paper and proceed with printing. Once you have changed the paper, the screen for setting rear tray or cassette paper information appears.
Page 347 2114 Cause Paper settings for printing do not match rear tray paper information set on printer. Note • See below for the correct correspondence between paper settings made on the printer driver or on the LCD. Paper Settings on the Printer Driver and the Printer (Media Type) (Windows) Paper Settings on the Printer Driver and the Printer (Paper Size) (Windows) •...
Page 348 For example, if the print paper setting is A5, and rear tray paper information is set to A4, change the paper in the rear tray to A5 paper and proceed with printing. Once you have changed the paper, the screen for setting rear tray paper information appears. Set paper information for the paper in the rear tray.
Page 349 4103 Cause Cannot perform printing with current print settings. What to Do Press the printer's Stop button to cancel printing. Then change the print settings and retry printing.
Page 350 Press ink tanks until they click into place. Turn the printer back on. If this does not solve the problem, contact your nearest Canon service center to request a repair. Important • When clearing an impediment to print head holder motion, be careful not to touch white belt (A).
Page 351 Printer error has occurred. What to Do Turn off printer and unplug it. After a while, plug in the printer again and turn it back on. If this does not solve the problem, contact your nearest Canon service center to request a repair.
Page 352 5B00 Cause Printer error has occurred. What to Do Contact your nearest Canon service center to request a repair. Note • In the case of warnings or errors caused by remaining ink levels, the printer cannot print.
Page 353 List of Support Code for Error (Paper Jams) Turn off printer and unplug it. Plug in the printer again and turn it back on. If this does not solve the problem, contact your nearest Canon service center to request a repair.
Page 354 Printer error has occurred. What to Do Turn off printer and unplug it. Plug in the printer again and turn it back on. If this does not solve the problem, contact your nearest Canon service center to request a repair.

Canon TS700 Series Online Manual

Using Online Manual

Basic Operation

Network

Handling Paper, Ink Tanks, Multi-Purpose Tray, Etc

Overview

Information about Paper

Printing

Frequently Asked Questions

List of Support Code for Error

Quick Links

Related Manuals for Canon TS700 Series

Summary of Contents for Canon TS700 Series