Table of Contents
Advertisement
Cleaning Paper Feed Rollers
If a paper feed roller is dirty or paper powder is attached to it, paper may not be fed properly. In this case,
perform Roller Cleaning. Cleaning will cause wear on rollers, so perform this only when necessary.
You need to prepare: three sheets of A4 plain paper
1.
1.
Check that printer is turned on.
2.
2. Select
(Setup) on HOME screen.
Using Touch Screen
The setup menu screen will appear.
3.
3. Select
Maintenance.
The Maintenance screen will appear.
4.
4. Select Roller Cleaning.
The confirmation screen will appear.
5.
5. Select Yes.
6. Select the paper source to use for cleaning.
6.
7.
7. Follow the message to remove any paper from the paper source.
If you clean the paper feed roller of cassette, remove any paper from the cassette, then push it back.
8. Tap OK.
8.
The paper feed rollers will rotate as they are cleaned without paper.
9. Make sure that the paper feed roller has stopped rotating, then follow the message to load
9.
the three sheets of A4 plain paper in the paper feed point where the paper feed roller is
being cleaned.
159
Advertisement
Table of Contents
