Uniden EXAI 398 Series Owner's Manual page 46

EXAI398 12/26/2 10:33 AM Page 46
Symptom
Severe noise interference.
The answering system does
not work.
The answering system does not
answer calls.
Messages are incomplete.
After a power failure, the outgoing
message is deleted.
No sound on the base unit speaker
during call monitoring or message
playback.
Cannot access remote call-in
features from another touch-tone
phone.
If you still have a problem.
[ 46 ] A D D I T I O N A L I N F O R M A T I O N
• Keep the handset away from microwave ovens, computers, remote control toys,
wireless microphones, alarm systems, intercoms, room monitors, fluorescent
lights, and electrical appliances.
• Move to another location or turn off the source of interference.
• Make sure the base unit is plugged in.
• Make sure the answering system is turned on.
• Set the record time to either the one minute or four minute option.
• The memory may be full. Delete some or all of the saved messages.
• The incoming messages may be too long. Remind callers to leave a
brief message.
• The memory may be full. Delete some or all of the saved messages.
• Record your personal outgoing message again. The default message should remain.
• Adjust the speaker volume on the base unit.
• Make sure you're using the correct PIN code.
• Make sure that the touch-tone phone you're using can transmit the tone for at
least two seconds. If it cannot, you may have to use another phone to access your
messages.
• Call our customer hotline at 1-800-297-1023.
Suggestion
www.uniden.com