Uniden EXAI 398 Series Owner's Manual page 41

EXAI398 12/26/2 10:33 AM Page 41
Recording a conversation
You can record up to 10 minutes of conversation while you are using your phone.
1) During a conversation from the handset, press and hold memo. The unit begins recording and
[ ] flashes on the message counter.
A beep that can be heard by both parties, sounds during recording.
If you receive a call waiting tone while recording a conversation, press flash to accept the
waiting call. The recording feature continues recording the new call. The original call is
put on hold.
2) To stop recording, press play/stop or memo.
Remote access away from home
You can operate your answering system from a remote location using any touch-tone telephone.
Use this function to check for recorded messages, to play or delete messages, even to record a
new greeting message.
1) Call your telephone number.
2) During the greeting message, press 0 and enter your PIN code.
(See "Setting a Personal Security Code", page 41).
3) The answering system announces the current time and the number of messages stored in
memory. Then you hear "To play incoming messages, press pound two. For help, press pound
zero".
4) You may continue to listen to the Help Guidance, or you may select a command from the
following chart:
www.uniden.com T H E I N T E G R A T E D A N S W E R I N G D E V I C E
• A recorded conversation
is treated as a typical
message and will be
added to the stored
messages.
• When recording a
conversation, all handset
keys, except talk/flash,
delete/ch, volume /
and end are disabled.
Stop recording if you
need to enable any other
handset keys.
For your convenience
remote operation cards are
provided for you to use
while away from home
(located after the index
page).
[ 41 ]