Uniden EXAI 398 Series Owner's Manual page 34

EXAI398 12/26/2 10:33 AM Page 34
When using the Announce
only feature, you may
want to change your
outgoing message, if the
message prompts the
caller to leave a message.
The prerecorded message
changes automatically.
[ 34 ] T H E I N T E G R A T E D A N S W E R I N G D E V I C E
Selecting the message record time
You have three record time options. The options "1 minute" or "4 minutes" set the duration for
recording the incoming messages. "Announce only" answers the call with the preset greeting or
your personal greeting but prevents the caller from leaving a message.
1) Press menu four times.
You hear "Record time" and the current recording time ([
Announce only), and it is displayed on the base.
2) Press repeat/rew or skip/ff until the desired time appears.
3) Press set/ringer to select the new recording time. You hear a confirmation tone, then the
announcement "Record time" and new recording time is announced.
▼
Announce only feature
The announce only feature plays a prerecorded outgoing message "Hello, no one is available to take
your call. Please call again.", but it will not allow the caller to leave a message. To set "Announce
only", follow the steps above.
To scroll between the prerecorded message or your own personal greeting, press greeting when the
outgoing message is played. If you want to use your own greeting, you may want to change your
greeting to omit the prompt "to leave a message". Refer to "Recording a personal outgoing
message" (Greeting) on page 36.
] 1 minute, [ ] 4 minutes, [
www.uniden.com
]