Mounting Under A Desk Or A Shelf - Cisco C9200CX-8P-2X2G-A Hardware Installation Manual

Mounting Under a Desk or a Shelf

Danger
Mounting Under a Desk or a Shelf
Before you begin
Ensure you have the following items before starting the procedure.
• Desk mount (C9K-CMPCT-DESK-MNT)
• Three 8-18 Phillips pan-head screws
• Two 10-32 Phillips pan-head screws
• Screwdriver
Procedure
Step 1 Use the desk mount to align the screw holes and also as a guide to make sure that you install the screws under
the desk or shelf with proper clearance.
Step 2 Use a 0.144-inch (3.7 mm) or a #27 drill bit to drill a hole 1/2-inches (12.7 mm) deep on the desk or shelf.
Step 3
Insert the screws in to the slots on the desk mount, and tighten them.
Cisco Catalyst 9200CX Compact Series Switches Hardware Installation Guide
30
Ensure that you mount the switch in an enclosed and secure area. Pulling the cables hard or an
occurance of a seismic event can cause the magnet to dislodge from the mounting surface and cause
bodily harm.
Installing a Compact Switch