Table of Contents
Advertisement
9.5 Over-the-air update
The App may propose an update for your
appliance.
The update is accepted via App only.
If a programme is running, the App notifies
that the update will start at the end of the
programme.
During the update, the appliance shows
in the display.
10. SETTINGS
10.1 Acoustic signals
This appliance has different acoustic signals,
that operate when:
• You activate the appliance (special short
tune).
• You deactivate the appliance (special
short tune).
• You touch the buttons (click sound).
• You make an invalid selection (3 short
sounds).
• The programme is completed (sequence
of sounds for about 2 minutes).
• The appliance has a malfunction
(sequence of short sounds for about 5
minutes).
11. BEFORE FIRST USE
1. Make sure that the electrical power is
available and the water tap is open.
2. Pour 2 litres of water into the detergent
compartment marked by
This action activates the drain system.
3. Pour a small quantity of detergent into the
compartment marked by
12. DAILY USE - WASHING ONLY
WARNING!
Refer to Safety chapters.
Do not switch off or unplug the appliance
during update.
The appliance will be usable again at the end
of the update, without any notification about
successful update.
If an error occurs, the appliance shows
in the display: just press any buttons or turn
the knob to return to normal use.
To activate/deactivate the acoustic signals
when the programme is completed, touch the
Wash Mode and the Prewash buttons
simultaneously for about 2 seconds. The
display shows On or Off.
If you deactivate the acoustic signals,
they continue to operate when the
appliance has a malfunction.
4. Set and start a programme for cotton at
This removes all possible dirt from the drum
.
and the tub.
.
12.1 Activating the appliance
1. Connect the mains plug to the mains
2. Open the water tap.
3. Press the On/Off button for a few
the highest temperature without any
laundry in the drum.
socket.
seconds to activate the appliance.
ENGLISH
37
Advertisement
Table of Contents
