Before First Use; Settings - Electrolux EW9W1165RC User Manual

10. BEFORE FIRST USE

During installation or before first use you
may observe some water in the
appliance. This is a residual water left in
the appliance after a full functional test in
the factory to ensure the appliance is
delivered to customers in perfect working
order and is no cause for concern.
1. Make sure that all transit bolts have been
removed from the appliance.
2. Make sure that the electrical power is
available and the water tap is open.

11. SETTINGS

11.1 Child Lock
With this option you can prevent that the
children play with the control panel.
• To activate/deactivate this option, touch
the Taches/Prélavage and the Départ
Différé buttons simultaneously until the
indicator comes on/goes off on the
display.
You can activate this option:
• After you touch the Départ/Pause button:
all the buttons and the programme dial are
deactivated (except Marche/Arrêt button ).
• Before you touch the Départ/Pause
button: the appliance cannot start.
The appliance keeps the selection of this
option after you switch it off.
11.2 Acoustic signals
This appliance is provided with different
acoustic signals, that operate when:
• You activate the appliance (special short
tune).
• You deactivate the appliance (special
short tune).
• You touch the buttons (click sound).
• You make a wrong selection (3 short
sounds).
• The programme is completed (sequence
of sounds for about 2 minutes).
26 ENGLISH
3. Pour 2 litres of water into the detergent
compartment marked by
This action activates the drain system.
4. Pour a small quantity of detergent into the
compartment marked by
5. Set and start a programme for cotton at
the highest temperature without any
laundry in the drum.
This removes all possible dirt from the drum
and the tub.
• The appliance has a malfunction
(sequence of short sounds for about 5
minutes).
To deactivate/activate the acoustic signals
when the programme is completed, touch the
Départ Différé and the Time Manager buttons
simultaneously for about 6 seconds.
If you deactivate the acoustic signals,
they continue operate when the
appliance has a malfunction.
11.3 Permanent Extra Rinse
With this option you can permanently have
one or two extra rinses when you set a new
programme.
• Simultaneously touch the Température
button and the Essorage button once to
add one extra rinse.
display.
• Simultaneously touch the Température
button and the Essorage button twice to
add two extra rinses.
display.
• Simultaneously touch the Température
button and the Essorage button three
times to remove extra rinses. The display
only shows .
.
.
appears on the
appears on the