Power On - Axis HD1409Q Manual

Touch Instructions:
● Tap any of the "Delay" icons to activate the digital input box. Tap Enable to turn on/off the auto
scan function. Tap any of the "Display" icons to activate an interface to select camera images.
Feature Instructions:
● Display: to set the preferred display image when in auto scanning. For more details, please refer
to the part: "6.2.6.4.3 Display".
● Delay: To set duration time of scanning image, ranging 0-60s. If the delay of a channel is set to 0,
then auto scan will skip to another channel whose delay is longer than 0 second. The operation
of delay is the same as in part: "6.2.6.4.1 Input panel".
● Enable: Turn on/off auto scan function.
Other Instructions:
● If parameters of "Display" or "Delay" are changed during auto scan, they will take effect on the
next cycle. You can also validate parameters immediately by turning the auto scan function off
and on again. Auto scan can be interrupted by the trigger function.

6.6.6 Power On

Button Panel Instructions:
● Power: Enter/exit standby mode.
● +/-: Move the cursor and highlight the selected icon.
Pic.6.2.6.5
24