Home Menu - Axis HD1409Q Manual

● While the auto scan and trigger functions are inactive, and in split-screen mode (not PIP1/2/3 or
SP), tap one of the channels to enter single view display of the channel, and tap again to enter
split view.
● While the auto scan and trigger functions are inactive, and in split-screen mode (not PIP1/2/3 or
SP), tapping two different channels will pop up a green semitransparent box, and when the
fingers leave the screen, the two channels will change positions on the display. If the channel
that you want to exchange is not displayed, you may move the touch point to the top of the
screen, and the hidden channel will show up.
● While the auto scan and trigger functions are inactive, and in split-screen mode (not PIP1/2/3 or
SP), tapping the same channel with two fingers will pop up a red semitransparent box for
choosing audio output channel.
● While the auto scan and trigger functions are inactive, without menu, and when in single view
display, tap the screen with two fingers to pop up the red box, increase or shorten the distance
between the two points to enlarge/shrink the red box.
Tap the area inside the red box to magnify the selected area. While zoomed, single point
dragging can move the image. Tap the magnified image to go back to the normal size. Tap the
area outside the red box to exit the magnified mode.

6.2 Home Menu

Button Panel Instructions:
● Power: Enter/exit standby mode.
● +/-: Move the cursor.
Pic. 6.2.1-3
10