Replacing The Bulb - Sony HVL-80DA Operating Instructions Manual

Opening the Front and
Rear Casings Replacing the Bulb
'1 Unfasten the two buckles.
2 Remove the connector of the battery pack from the
receptacie inside the front casing.
3 Remove the two screws from the bulb socket.
2 Set the end of a buckle to the rear of the catch. 4 Pull out the bulb socket gently.
3 Press the buckle plate in the direction of the arrow.
& Remnove the ofd bulb rom the socket and plugin the apare
gently.
The bulb is hot when it is bumed out.
Set an object like a coin in the cutout of the arm base and
7 Plug the connector of the battery pack into the receptacle
inside the front casing.
¢A spare bulb is supplied with the unit.
© For replacement, always use the Sony halogen lamp
-80D/80DA. specified for the HVL.-
© To prevent the bulb from being smudged with finger prints,
: plug the bulb holding it with a plastic bag or dry cloth. If the
bulb is smudged, the light may smoke when it is tumed on
or the bulb life may be shortened. if you have touched the
Before opening the casing, be sure to dry the video light and bulb surface, clean it completely.
yourself so that no water drops inside. Water drops inside * Do not plug the bulb into the socket forcibly.
the casings may cause damages to the video light.
BTS CIS E E R OEE ENTS see Bi pnt SEG EE DE ve Be eee gel A Sd L R
Oe eae pe ae afte Ee. Ha See. Ses eer Baty Retraeca Potters e
poss Psa e s o S i R died asa RT Sa eee EE a OS