Turning The Light On - Sony HVL-80DA Operating Instructions Manual

Turning the Light On
1 Loosen the power switch lock screw.
2 Set the power switch to ON.
After use, set the power switch to OFF and tighten the
power switch lock screw, while inserting the tip of the
screw in the screw hole.
Power switch
ON
OFF
Screw hole
Power switch
lock screw
PAVolL etsy diate mm talsMyAVarel (=
1 Loosen the angle lock screw and adjust the angle of
the video light so that the object is Iuminated.
2 Tighten the angle lock screw to fix the angle.