Table of Contents
Advertisement
Warnings
Flashing: When the
amount of tape
remaining reaches
three minutes or less
during recording.
7APE END
Lit:
When the tape has
run out during
recording.
TAPE ENO
Flashing: When the
power is turned ON
without a tape inserted
or a recording-
prohibited tape has
been inserted.
Flashing: When
condensation or a
malfunction occurs
(P- 72).
Flashing: When the
backup battery is
almost exhausted or
none has been inserted _
(p. 67).
Tape counter
1 :23 :45
The tape counter indicates the
approximate running time of the tape
-1 hour, 23 minutes and 45 seconds in
this example. The tape counter is reset
when a cassette is loaded, or when you
press the wireless controller's
C. RESET button.
Recording reminder
When you start recording, the camera
counts from OSEC to 10SEC. Shots
which are shorter than 10 seconds may
be difficult to edit later. On the other
hand, if you are not planning to edit the
recording, remember that a shot which
does not contain action should
generally last no longer than 10
seconds.
Advertisement
Table of Contents
