Table of Contents
Advertisement
When you have finished recording
• Replace the lens cap.
• Return the viewfinder to its retracted and lowered position.
• Close the LCD panel.
• Unload the cassette.
• Set the POWER switch to OFF.
• Disconnect the power source.
Notes:
• To check that the camera is recording correctly, make a test recording first.
• Before making important recordings, clean the video heads using a Canon CC-8
Video Head Cleaning Cassette or a commercially available 8mm video head
cleaning cassette.
• You cannot monitor the sound from the speaker when recording.
• For tips on how to make better videos, see page 27.
I Recording with the LCD screen
In place of using the viewfinder, you can also monitor recording using the LCD
screen.
When you open the LCD panel, the viewfinder turns off automatically.
For more details please refer to "Using the LCD Screen" (p. 15).
Notes:
• You cannot monitor the sound from the speaker during recording.
• The LCD screen uses a lot of power, so possible recording time will be less than
if you were to use the viewfinder.
• Be sure to close the LCD panel flush to the camera body when you have
finished recording with the LCD screen.
12
Advertisement
Table of Contents
