Advertisement
Various Playback Operations
To listen to the beginning of a selection for more than
the designated time
Press » (play) while the selection you want to listen to is
played back.
While pressing », the countdown at the MARGIN indicator
stops, and the playback of that selection continues.
To listen to an entire selection
Press MUSIC SCAN while the selection you want to listen to
is played back.
The music scan function is released, and the playback of
that selection continues.
When you press MUSIC SCAN during playback, the tape is
rewound to the beginning, and then the first part of each
selection (start ID position) is played back for the time you
designated sequentially.
Designating the Desired Selection
For this operation, the selections must be numbered
by the program numbers. The program numbers
are written at the same position as the start ID
codes. For how to write the program number, see
page 28.
1 During the desired program number with the numeric
button(s)*.
Current program
number
Designated program
number
38
2
Press > (play).
The designated selection is searched for at high speed
and playback starts from the beginning of that selection.
PGM NO.
ai
|
|
Displayed number is
Goes off.
advanced to the
designated number
one by one.
When you press the numeric button(s) during play-pause
mode, the deck enters the pause mode at the beginning
of the designated selection. Press i or ® to resume
playback.
If an incorrect number is designated
Before pressing », press CLEAR.
The displayed program number will be cleared.
Then designate the correct program number.
Once & is pressed, it is impossible to cancel the
designated selection.
Skip play
For this operation, the skip ID code(s) must be written on
the tape.
Press SKIP PLAY.
The SKIP PLAY indicator lights.
During playback, the tape skips to the next start ID
position automatically when a skip ID is detected, and
the playback resumes.
SKIP PLAY
PGM NO.
5
To stop skip play
Press SKIP PLAY to turn the SKIP PLAY indicator.
Advertisement
