Table of Contents
Advertisement
Removing a Road Wheel
WARNINGS
Park your vehicle in such a position
that neither the traffic nor you are
hindered or endangered.
Park your vehicle so that you do not
obstruct the flow of traffic or place
yourself in any danger and set up a
warning triangle.
Make sure that your vehicle is on firm
and level ground with the front
wheels pointing straight ahead.
Switch the ignition off and apply the
parking brake.
If your vehicle has a manual
transmission, shift into first or reverse
gear. If your vehicle has an automatic
transmission, shift into park (P).
Make sure all passengers are out of
your vehicle.
Secure the diagonally opposite
wheel with an appropriate block or
wheel chock.
Make sure that the arrows on
directional tires point in the direction
of rotation when your vehicle is
moving forward. If you have to fit a spare
tire with the arrows pointing in the opposite
direction have the tire refitted as soon as
possible.
Do not work on your vehicle when
the jack is the only support. If the
vehicle slips off the jack, you or
someone else could be seriously injured.
Make sure that the vehicle jack is
vertical to the jacking point and the
base is flat on the ground.
Territory (CF4) Philippines, Vehicles Built From: 25-05-2020, EN, First Printing
Wheels and Tires
down on the ground, this will damage
the paint.
the rear trunklid.
1.
2. Jack up your vehicle until the tire is
3. Remove the lug nuts and the wheel.
Removing and Installing a Spare
Wheel
155
Note: Do not lay alloy wheels face
Note: The spare wheel is located on
Loosen each wheel lug nut one-half
turn counterclockwise, but do not
remove them.
clear of the ground.
1. Park the vehicle on a level firm
ground and activate the hazard
flashers.
2. Apply the parking brake, place the
transmission in park(P). switch
the ignition off and set up a
warning triangle.
3. Remove the trunk carpet.
4. Remove the spare wheel retainer.
5. Remove spare wheel.
Advertisement
Table of Contents
