Table of Contents
Advertisement
1.
Remove the jumper cable from the
ground metal surface.
2. Remove the jumper cable on the
negative (-) terminal of the booster
vehicle's battery.
3.
Remove the jumper cable from the
positive (+) terminal of the booster
vehicle's battery.
4.
Remove the jumper cable from the
positive (+) terminal of the disabled
vehicle's battery.
After the disabled vehicle has been started
and the jumper cables removed, allow it
to idle for several minutes so the engine
computer can relearn its idle conditions.
Territory (CF4) Philippines, Vehicles Built From: 25-05-2020, EN, First Printing
Roadside Emergencies
119
Advertisement
Table of Contents
