Ducati DEA 5200 Owner's Manual page 37

English
Owner´s manual
Insert the earth auger
1. Place the motor housing on a
work bench.
2. Place the earth auger (7) on the
driveshaft (6), making sure both
holes are aligned.
3. Insert the drive pin (A).
4. Secure with split pin (B) and bend
slightly.
IMPORTANT
This assembly step is appliable for 4 kinds of earth aruger and 1 kind of ice earth.
Fuel supply
1. Open the fuel tank cap (15).
2. Pour the fuel mixture out of a
funnel.
3. Do not fill the tank completely as
the fuel expands.
4. Tightly close the fuel tank cap
(15) and clean the area of possibly
spilled fuel mixture.
Starter cord
Pulling the cable (9) starts the
engine.
37