Table of Contents
Advertisement
Antenna connections
If you are using an indoor or outdoor antenna, follow the instructions below that correspond to you r antenna
system. If you are using a cable TV service (CATV), see page 12 for Cable TV connections.
Combination
VHF/UHF Antenna (Single 75 ohm Cable or 300 ohm Twin-lead
Wire)
•
-'q
Antenna
Antenna
Jack
Jack
UHF/
VHF
75 ohm
Coaxial
Cable
300-75 ohm Matching
Transformer
(not supplied)
Connect the 75 ohm Cable from the Combination
VHF/UHF Antenna to the Antenna Jack.
If your Combination VHF/UHF Antenna has a 300
ohm Twin-lead Wire, the use of the 300-75 ohm
Matching Transformer
may be necessary.
Combination
VHF/UHF Antenna (Separate VHF and UHF 300 ohm Twin-lead
Wires)
Antenna
Jack
300-75 ohm Matching
VHF 300 ohm
Connect the UHF 300 ohm Twin-lead Wire to the
Combiner
(not supplied).
Connect the VHF 300
ohm Twin-lead Wire to the 300-75 ohm Matching
Transformer. Attach the Transformer
to the Com-
biner, then attach the Combiner to the Antenna
Jack.
Separate VHF/UHF Antennas (75 ohm VHF Cable and 300 ohm UHF Twin-lead Wires)
Antenna
Jack
Connect the VHF 75 ohm cable and UHF 300 ohm
Twin-lead Wire to the Combiner. Attach the Com-
biner to the Antenna Jack.
11
Advertisement
Table of Contents
