Advertisement
RXD-F3/F4/F41/F42
EXTERNAL VIEW / CAUTION
Cover
(F07-0757-03)
Metallic cabinet
(A01-3231-01)
|
PUTT
VEU
o VUTTUII
aa
@
=
mE
NWOOD
RKO-FS.
AE 110:
7201
'60M
save
Phono jack*
:
WOT
ie
weuT
(FATSA LOOP ANTENNA
ANTENNA
Lock terminal board*
'AUK
INPUT
(ANTENNA)
|
scoumass || ee | QD
(E20-)
Oe
Slide switch
sat
roore
(E63-)
Lock terminal board"
(E70-)
(S62-0034-05)
Slide switch
ops emt
@5~
ears
Sear aOra Ad Sica sc mooraeoy
:
*
DOLBY NOISE REDUCTION AND Hx FH we AMAIDK FKILNSION MANUFACTURED
h e e
nee
AC power cord* —-——
wien) OMGMATIO
BY BaNG GOLIST
(E30- )
DOSY THE COUBLE-0 SYMAC! AND MX PRC ARE IMASEMARKS OF DOLBY
CASONATQMS UECASING CORPORATION
Power cord bushing
(J42-0083-05)
Photo is RXD-F3 M type(It's like RXD-F41)
Caution
TIT
WnnN
|
CLASS 1
betas
LASER PRODUCT
|
Variable resister
(R31-0002-05)
*Refer to parts list on page 79.
:
Beware of condensation
When water vapor comes into contact with the surface of cold materi-
al, water drops are produced. If condensation occurs, correct opera-
tion may not be possible, or the unit may not function correctly. This is
not a malfunction, however, and the unit should be dried. (To do this,
turn the POWER switch ON and leave the unit for several hours.)
Be especially careful in the following conditions:
acer the unit is brought from a cold place to a warm place, and
there is a large temperature difference.
When a heater starts operating.
When the unit is brought from an air-conditioned place to a place
of high temperature with high humidity.
When there is a large difference between the internal temperature
of the unit and the ambient temperature, or in conditions where
condensation occurs easily.
ae)
Note related to transportation and movement
(CD player)
Before transporting or moving this unit, carry out the follow ing opera-
tions.
1. Turn the power ON but do not load a disc.
e@Press the CD(»/t) key to check that no disc is present On the tray.
2. Wait a few seconds and verify that the display shows appears.
#
a {8}
3. Turn the power OFF.
Advertisement
