@
9
@
RXD-F3/F4/F41/F4z
DISASSEMBLY FOR REPAIR
3) Replacing the pickup
1. Remove the two clamp bracket attachment screws.(Fig.1 ®).
2. Remove the four screws affixing the lift slider and
lift out the lift slider and traverse unit.
3. Short the short land.
4. Remove the connector of the flat cable.
5. Remove the gear.
6. Remove the shaft.
%% When reassembling, always be sure to align the
cam gear and traverse shaft as shown in @ and @of Fig @.
Then remove a tool of the short land.
Note : Don't separate pickup PC board from pickup.