Sony KP-53HS10 Operating Instructions Manual page 40

EFFECT _; _'_"
--=
EFFECT can only he set when SPEAKER is set to
ON.
TRUSURROUND*:
Produces a virtual surround effect for Dolby-
surround encoded programs.
SRS 3D MONO:
Adds a surround-like effect to mono programs.
OFF:
Normal stereo or mono reception.
SPEAKER
_ i_ ii!ili ¸i
ON:
Select to listen to the sound from the projection
TV speakers alone.
OFF:
Select to turn off the projection TV speakers and
listen to the projection TV's sound only through an
external audio system's speakers.
CENTER IN:
Select to use the projection TV as center speaker
when you connect an amplifier with a Dolby Pro
Logic decoder. (see "Connecting an Amplifier
That Supports Dolby Pro Logic Decoder" on page
21)
7"o restore the factory settings
Press RESET on the remote control while the
AUDIO menu is selected.
*(@)TruSurround"
TruSurround, SRS and the (e)" symbol are
trademarks of SRS Labs, Inc. in the United States
and selected foreign countries.
TruSurround and SRS technology is incorporated
under license from SRS Labs, Inc.
Using the TIMER
Menu
TIME_
DAYLIGHT SAVING : NO
CURRENT TIME
ON / OFF TIMER
After setting the clock you can use the timer to
turn the projection TV on and off.
For detailed information on using the remote
control to modify menu settings, refer to "Learning
Menu Selection" on page 33.
To select the TIMER _ menu:
Display ,,_ Highlight (_) _ Select
rip
Set daylight saving time before setting the clock. Any
loss of power _'il1 cause these settings to he erased.