Sony KP-53HS10 Operating Instructions Manual page 16

Connecting a DI_ (digital
television) receiver with the Y/P_/
PR (component video Input) Jacks
1
Attach the coaxial cable from the roof antenna
to VHF/UHF on the DTV receiver.
2
3
4
5
Using three VIDEO cables, connect Y, PB and
Pr of COMPONENT VIDEO OUT on the
DTV receiver to Y, PB and Pr of VIDEO 5
(DTV) IN on the projection TV.
Using an AUDIO cable, connect LINE OUT
on the DTV receiver to AUDIO of VIDEO 5
(DTV) IN on the projection TV (White-
AUDIO Left, Red-AUDIO Right).
Select VIDEO 5 by the TV/VIDEO button.
Select the SET UP menu and set DTV INPUT
to Y PB PR. (see "DTV INPUT" on page 43)
Note:
• Some DTV receiver terminals may be labeled
differently. If so, connect as follows:
Connect Y (green) to Y.
Connect PB (blue) to Cry, Ch or B-Y.
Connect PR (red) to Cr, C, or R-Y.
m
PB m
PR ._
Disconnect all power sources before making any connections.
-Y
,ll
VMC-10HG
(not supplied)
_i 6 DTV receiver
VHF/dH,
W_Jm
®
AUDIO-R AUDIO-L Roof Antenna
L _K-74A (not supplied)
2