Watching The Tv - Sony KP-53HS10 Operating Instructions Manual

Watching the TV
Many TV features can be accessed directly
through the remote control. The following will
explain the function of some buttons found on your
remote control.
Using the white labeled buttons for
projection TV operations
REFER 'IT) TttE
1LL_L_'TRATION OF TIlE
REMOTE CONTROL ON TIlE INSIDE FRONT
COVER OF Tills MANUAL AS YOU REVIEW TItE
FOLLOI._TNG DESCRIP'ITONS
Activates the remote control for use with the
projection TV.
Press to change between the VHF/UHF input and
the AUX input. (for detailed connection
information, see "Cable and antenna" or "Cable
box and cable" on page 8).
Turns the projection TV on and off. If a video
input indication (e.g., VIDEO 1, VIDEO 2)
appears on the screen, press TV/VIDEO until a
channel number appears.
Use for direct channel selection. Press 0-9 to select a
channel (for example, to select channel 10, press 1
and 0). The channel will change after 2 seconds, or
you can press ENTER for immediate selection.
CH+i.
Press to scan through the channels (+ up or -
down).
VOL +/-
Press to adjust the volume (+ up or - down).
JUMP
!<:!:!i!:::!:iii m
Press to alternate or jump back and forth between two €_ _.
channels. The projection TV will jump between the
current channel and the last channel selected using the _
0-9 buttons.
"1
Press to mute the sound. "MUTING" will appear on ,_.
the screen and will dim three seconds later. To restore
sound, press again or press VOL +.
FREEZE
_ _ye--o -----e_-- tton-( lt _ laoel _ _ )
This is useful when you need to copy down
information that appears on the TV's screen.
Press to freeze the pictttre.
Press again or press (_ to cancel.
If you select TWIN as a FREEZE MODE in the
SET UP menu, you can freeze the desired scene
and display it on the left while viewing the normal
picture on the right. (see "FREEZE MODE" on
page 42)
(continued)
25