Automatically - Sony KP-53HS10 Operating Instructions Manual

Setting Up the
Projection TV
Automatically
The AUTO SET UP feature will allow you to set
the on-screen language and set all receivable
channels.
The AUTO SET UP feature does not apply for
installations that use a cable box for all channel
selection.
You can also set up the projection TV manually. (see
"Us "tg tl e CHANNEL SET UP Menu" on page 37)
Notes:
• Perform
this fimction during the day, with the
antenna and/or cable properly connected, to
ensure that all available channels will be
broadcasting and receivable.
• Before you perform AUTO SET UP again, make
sure that the input from ANT (not AUX) is
selected by pressing ANT until "AUX" does not
appear next to the channel number.
• When you perform AUTO PROGRAM, your
CHANNEL FIX and ON/OFF TIMER settings
will be erased.
• When you perform AUTO PROGRAM, all the
settings in the VIDEO and AUDIO menus are
reset to the factory settings.
Using the buttons on the front panel and inside the
lower front panel on the projection TV:
r'l
r'l
laE_a
_tm
Q
v:r ....
V
Press POWER to turn on the projection TV.
POWER
2 Press SET UP inside the lower front panel.
The AUTO SET UP screen appears.
3
SET UP
ENGLISH: [CH +]
ESPA_OL: [CR-]
FRAN_AIS: IVOL+I
AUTO SET UP: [VOL-]
First please connect
cable/antenna
Press [ SET UP I to exit.
Press CHANNEL + to select English,
CHANNEL - to select Spanish or VOLUME +
to select French.
The screen will change to reflect your choice.
CHANNEL
VOLUME
ENGLISH : [ CH + ]
SSPAI_OL : " [ CH - I
FRANQAIS : [ VOL + I
_JTG SET UP : IVOL - I
First please connect
Cable/antenna
Pre_ [ SET UP I to exit
4 Press VOLUME- to continue.
CONTINUE TO
AUTO PROGRAM?
YES: [CH ÷]
NO : [CH -]
(continued)
R
23