Sony FD Trinitron WEGA KV-32HV600 Operating Instructions Manual page 82

Remote Control
Remote control _ The batteries could be weak. Replace the batteries.
does not operate _ Check the orientation of the batteries.
Press the TV FUNCTION button. You may have inadvertently pressed the
SAT/CA_/LI UNCTION button, which changes the remote control to SAT or
CABLE mode.
Make sure the TV's power cord is connected securely to the wall outlet.
Locate the TV at least 3-4 feet away from fluorescent lights.
Cannot change channels _ If you are using the TV to change channels, first press the TV FUNCTION
with the remote control button.
If you are using another device to change chamlels, be sure you have not
inadvertently switched your TV from the channel 3 or 4 setting. Use the
Chz_u-_el Hx option to "fix" the channel based on the hookup you used (see
page 68).
If you are using another device to change channels, be sure to press the
FUNCrlON button for that device. For example, if you are using your cable box
to change channels, be sure to press
the S,a, r lCkF3LEFUNCTION button.
Remote control 3 If you replaced the batteries to the remote recently, the code numbers for
does not operate non-Sony the video equipment may need to be reset.
video equipment 3 There may be more than one code for the equipment that you are
attempting to operate.
There is a possibility that some non-Sony equipment cannot be operated by
your Sony TV remote.You may need to use the equipment's original
remote control.
Memory Stick
Image does not display _ Make sure the image is supported by the TV (see pages 53-54).
Make suite the Memory Stick is inserted properly (see pa}_e 55).
J Memory Stick functions are not available while using Twin View, Freeze or
Favorite Channel functions.
Blank square appears _ This indicates that the image does not support a thumbnail view. Selecting
instead of a thumbnail image the icon, however, displays the full-size image on the screen. It could also
indicate that both the thumbnail and full-size images are corrupted or not
supported.
Cannot rotate image, no ) Be sure the LOCK switch on the Memory Stick is set to off.
thumbnail appears _ If a blank square appears instead of the thumbnail image, this indicates
that the image does not support a thumbnail view and cannot be rotated.
Cannot hear audio while _ There is no audio available while using Memory Stick.
using Memory Stick
Image file name does not _ Dashes appear instead of the file name if the image was recorded using
appear; instead, dashes (---) equipment that is not DCF-compliant. Dashes also appear if a DCF-
appear compliant file was renamed.
81