Sony FD Trinitron WEGA KV-32HV600 Operating Instructions Manual page 20

Notes onUsing T his Connection
To connect thecable b ox and cable
1 Connect the cable from your cable company to the TV's
VHF/UHF jack.
2 Use a coaxial cable to connect the TV's TO CONVERTER jack to
the cable box's input jack. (The TV's internal converter lets you
switch between unscrambled signals coming straight into the TV
and scrambled signals coming in through the cable box,
eliminating the need for an external splitter.)
3 Use a coaxial cable to connect the cable box's output jack to the
TV's AUX jack.
4 Run the Auto Setup program, as described in "Setting Up the
Channel List" on page 38.
_N
Coilxial cable
(_ OtlF 3 AUX
2
TO
Co_xia cable CONVERTER
Cable (unscrambled d al_neB) VHFIUHF
Use the cable box Tune the TV to the channel the cable box is set to (usually channel 3 or 4)
and then use the cable box to switch channels.
Set up the TV remote control Program the remote control. See "Programming the Remote Control" on
to operate the cable box pages 43-44.
Activate the remote control to Press SAT/CABLE FUNCTION
operate the cable box
Prevent the accidental When using the cable box, you need the TV to stay on the channel the cable
switching of TV channels box is set to (usually channel 3 or 4). You can use the TV's Channel Fix
feature to lock in a specific channel. For details, see Using the Channel
Menu" on page 68.
Switch the TV's input Press ANTto switch back and forth between the TV s VttF/UIIF
between the cable box and (unscrambled channels) and AUX (scrambled) inputs.
cable