Sony FD Trinitron WEGA KV-32HV600 Operating Instructions Manual page 12

M }MORYSnCK Memory Stick insertion slot. For details, see "Using the Memory Stick Picture
Viewer" on page 53.
[2] MEMORY5HCK LED When lit, indicates that the Memory Stick is being read. (Do not remove the
Memory Stick when the indicator is lit.)
[3] S VIDEO Connects to the S VIDEO OUT jack on your camcorder or other video
VIDEO2 iNPUT equipment that has S VIDEO. Provides better picture quality than composite
vide() (_).
14] VID}O/L(MONO)AUDIO-B Connects to the composite A/V output jacks on your camcorder or other
VlDrO 2 INPUT
video equipment.
15] M iN U Press to display the Menu. Press again to exit from the Menu. For details, see
"Using the Menus" on page 63.
[] _ • ÷ ÷ Press _ _ ÷ ÷ to move the on-screen cursor.
1_;] + S}LECT Press to select the on-screen highlighted item.
18_ TV/VID FO Press repeatedly to cycle through the vide() equipment connected to the TV's
vide() inputs.
19] _VOLU M} _ Press to adjust the volume.
110] _CHANPq} k_- Press to scan through channels. To scan quickly through channels, press and
hold down either C}qANN} k button.
11_] TIM}R LE D When lit, indicates one of the timers is set. When the timer is set, this LED
will remain lit even if the TV is turned off. For details, see page 73.
112] STANDFlYLED Blinks when the TV is turned on, then shuts off when the picture is displayed.
If the LED blinks continuously; this may indicate the TV needs service (see
"Contacting Sony" on page 80).
1113] Infra ed Receiver (lt_) Receives IR signals from the TV's remote control.
POWER
Press to turn on and off the TV.
11