Sony FD Trinitron WEGA KV-32HV600 Operating Instructions Manual page 26

m
Coaxial?
cable
4
1
CATV
cable
A/V cable _
Notes on Using This Connection
Watch cable (unscrambled)
Press 1V/VI{)EOrepeatedly
to select the cable input (UItF/VItF in the
channels illustration).
Watch cable box (scrambled) Turn on the VCR and tune it to the channel the cable box is set to (usually
channels channel 3 or 4). Press TV/VF)E0repeatedly to select the VCR input (VIDEO 1
in the illustration). Use the cable box to change channels.
Watch the VCR Press TV/VII/E0repeatedly to select the VCR input (VIDEO 1 in the
illustration).
Set up the TV remote control If you have a non-Sony VCR, you must program the remote control. See
to operate the cable box or "Programming the Remote Control" on pages 43-44.
VCR
Activate the remote control to For the cable box, press 5AT/CAI_L} FU NCTION.For the VCR, ()pen the outside
operate the cable box or VCR cover, as shown on page 42. Then set the A/V slide switch to the position
you programmed for the VCR.
Control specific cable box and See "Operating a Cable Box" on page 61 and "Operating a VCR" on page 60.
VCR functions with the TV
remote control
Label video inputs to easily See the ilzstructions for setting up Video Labels on pages 74-75.
identify equipment connected
to the TV
25