Samsung SMX-F40BN User Manual page 35

This c hapter introduces you tothe basic operation procedures ofthis camcorder, such a s
turning the power on/off, switching modes, and setting on-screen indicators.
TURNING YOUR CAMCORDER ON/OFF
1. Open the LCD screen and press the Power (O) button
to turn on the camcorder.
• Set the lens cover open/close switch to open (€).
2. To turn off the camcorder, press the Power (O) button.
LCD screen
Power(O) button
The camcorder operates the self-diagnosis function when powered on. If a warning message appears,
refer to 'warning indicators and messages' ("-pages 104-_106) and take corrective action.
SWITCHING TO THE POWER SAVING MODE
If you need to use camcorder for the extended time, the following functions enable you to
prevent unnecessary energy consumption.
Auto Power Off Function
• To save battery power, you can set
me "Auto Power Off" function.
wn_cn turns off the camcorder "
[nere is no operation for 5 minutes.
• To disable this option, cnange tne
"Auto Power Off" setting to "Off."
- oage 89
After 5 minuters
• The power saving mode does not work in the following situations:
When the camcorder has a cable connection. (USB or AV)
While recording, playback, or the slideehow is being operated.
• The camcorder consumes the less battery power in the power saving mode (about 50% of the
power consumption in the standby mode) However, if you plan to use the camcorder for the
maximum length of time period, it is recommended to turn off the camcorder by pressing the
Power (d)) button when not using it.
23
m