Table of Contents
Advertisement
VM5404HA / VM5808HA User Manual
Installation
1
Power
8
Power Cord
PC
1. Use a grounding wire to ground the unit by connecting one end of the wire
to the grounding terminal, and the other end of the wire to a suitable
grounded object.
Note: Do not omit this step. Proper grounding helps to prevent damage to
the unit from surges or static electricity.
2. Connect up to 4 (VM5404HA) or 8 (VM5808HA) HDMI video sources to
the HDMI input ports
3. Connect up to 4 (VM5404HA) or 8 (VM5808HA) HDMI display devices
to the HDMI output ports
4. To extract audio from one of the connected input sources, connect a
speaker to the audio out port.
5. To preview video inputs in a multiview screen, connect a display to the
local HDMI out port.
6. To access the unit's settings via the web interface, connect the unit to a
network switch via the LAN port with an Ethernet cable.
7. To operate the unit via RS-232 commands, connect a hardware/software
controller to the unit.
8. Plug a power cord to the unit and then put the power switch to ON.
9. Make sure all the connected devices are properly grounded to prevent
damages from power surges or static electricity before powering these
devices.
8
3
Video Wall
HDMI
or
or
DVD /
Blu-ray
Media Player
Player
6
Network
Ethernet
RS-232
HDMI
Audio
HDMI
4
2
Speakers
Monitors
7
Hardware /
Software Controller
VM5808HA
Rear View
5
Advertisement
Table of Contents
