Cec Command - ATEN VM5404HA User Manual

CEC Command

Consumer Electronics Control (CEC) allows interconnected HDMI devices to
communicate and respond to the same remote control.
The formula for the CEC command is as follows:
Command + Output + Number + Control + [Enter]
1. For example, to enable the CEC function on output port 1, type:
cec o01 on [enter]
The following tables show the possible values for the CEC command:
Command
Output Command
Port number
Control
Note: Each command string can be separated with a space.
The following table lists the available CEC commands:
Output
Command
cec
cec
cec CEC command
o Output command
yy 01-08 port (default is 01)
* All output ports
off Disable CEC (default)
on Enable CEC
Control
Port
off
yy
*
on
yy
*
Chapter 5. CLI Commands
Description
Description
Description
Description
Enter Description
[Enter] CEC off for output port yy
(default)
(yy:01~08, *)
[Enter] CEC on for output port yy
(yy:01~08, *)
91