Specifications - Crown XLS Series Operation Manual

6 Specifications

Minimum Guaranteed Power
120 VAC, 60 Hz Units, per channel, both channels driven
1 kHz with 0.5% THD
Stereo, 2 ohms (per ch.)
Stereo, 4 ohms (per ch.)
Stereo, 8 ohms (per ch.)
Bridge-Mono, 8 ohms
Bridge-Mono, 4 ohms
240 VAC, 50 Hz Units, per channel, both channels driven
1 kHz with 0.5% THD
Stereo, 2 ohms (per ch.)
Stereo, 4 ohms (per ch.)
Bridge-Mono, 4 ohms
Performance
Sensitivity (volts RMS) for full rated power at 4 ohms
Frequency Response (at 1 watt, 22 Hz - 20 kHz)
Phase Response (at 1 watt, 10 Hz, 20 kHz)
Signal to Noise Ratio below rated power (20 Hz to 20 kHz)
A-weighted, below rated power
No weighting, below rated power
Total Harmonic Distortion (THD) at 1 full bandwidth power, from 20 Hz to 1 kHz
Intermodulation Distortion (IMD) 60 Hz and 7 kHz at 4:1,
from full rated output to –40 dB
page 16
XLS 202
250W
200W
145W
400W
500W
250W
225W
500W
XLS 202
0.725
± 0.75 dB
–10°, +19°
> 100 dB
> 95 dB
< 0.5%
< 0.3%
XLS Series Power Amplifiers
XLS 402
570W
400W
260W
800W
1,140W
610W
445W
1,120W
XLS 402
1.025
± 0.75 dB
–10°, +19°
> 100 dB
> 95 dB
< 0.5%
< 0.3%
XLS 602
840W
600W
370W
1,200W
1,680W
880W
670W
1,760W
XLS 602
1.26
± 0.75 dB
–10°, +19°
> 100 dB
> 95 dB
< 0.5%
< 0.3%
Operation Manual