Parameterizing Via The Operator Interface; Device Information - Siemens SENTRON PAC4220 Manual

Parameterizing
7.1 Parameterizing via the operator interface
7.1

Parameterizing via the operator interface

You can parameterize the PAC4220 via the "Settings" menu option. You can find more
information on this in chapter Menu-based navigation (Page 66).
The device settings are arranged into the following groups. The "SETTINGS" menu shows the
choice of groups:

• Device information

Article number and versions
• Language/Regional
Display language and designation of the phases on the display
• Basic parameters
Settings for the measuring inputs, averaging time of the sliding window demand, zero point
suppression, frequency
• Power demand
Settings for the load profile
• Date/time
Time-related settings
• Integrated I/Os
Settings for using the digital inputs and outputs
• Communication
Network communication settings
• Display
Settings for the display
• Advanced
Password protection, limit values, universal counter, device reset, expansion modules
• Settings for expansion modules (only if an expansion module is used)
Functions for expansion modules available as options
7.1.1 Device information
The device information cannot be modified.
PAC4220
7KM4220-1BA01-1EC0
S/N: xxxxxx
SW-REV: xxxx
BL-REV: xxxx
LP-REV: xxxx
80
Device designation
Article number of the device
Serial number of the device
Firmware revision level
Bootloader revision level
Language pack version
Equipment Manual, L1V30827278B-01
PAC4220