Loading And Unhoading A Cassette Tape - Toshiba MW20F51 Owner's Manual

ading and unloading a cassette tape
Use only video cassette tapes marked [_.
Push the center of the tape until it is automatically
inserted.
Insert the cassette tape with its labeled side facing up
and the erase prevention tab positioned at your left. An
inverted cassette tape cannot be inserted.
t
• Erase prevention tab / \
Automatic power ON
When you insert a cassette tape the unit power will turn ON automatically.
Automatic pRayback
When loading a cassette tape without an erase prevention tab, playback will start automatically.
÷
1
STOmEJECT
[_ EJECT
or
Automatic tape eject
Press STOP/EJECT on the front panel or EJECT
on the remote control.
I :1
2
Remove the cassette tape.
This unit will automatically rewind the tape when the tape has ended. And when the tape is rewinded to its beginning,
the cassette tape will be ejected automatically.
Notes:
- Always eject the tape when not in use.
,, The cassette tape can be ejected even if the POWER is "OFF".
÷
To prevent accidental erasure
Remove the erase prevention tab with a screwdriver.
Screwdriver
Erase prevention tab
To record again
Cover the hole with a piece of adhesive tape,
_- Adhesive tape _
F Video cassette tape
u_p_ ope_u
T-160 %120 T-90 T-60 T-30
SP (Standard Play) 2-2/3 hours 2 hours 1-1/2 hours 1 hour 30 minutes
\SLP (Super Long Play) 8 hours 6 hours 4-1/2 hours 3 hours 1-1/2 hours x
5T 0101B [Elp34-38 34 ,_. 3/8/05, 9:57 AM